Skip to content
SunGeneAgricultural IoT
← All products
SG-EM-218: Single-Phase Direct-Connected AMI Smart Meter

Pictured: SG-EM-218 — Single-Phase Direct-Connected AMI Smart Meter.

Single-Phase Smart Energy Meter

Equipment options & specifications

Single-phase direct-connected smart meter for farm-building submetering, with plug-in PLC, RF or cellular communication modules and optional RS485 for remote reading.

Related application hardware: Farm pump & energy monitoring

Where this equipment fits

SG-EM-201: Single-phase DIN-rail energy meter
Pictured: SG-EM-201 — Single-phase DIN-rail energy meter.

Compare power use during irrigation

Bring pump or farm-panel readings into an operating record. Select the meter around the circuit, wiring and current input, then agree how the readings reach your system.

Compare pump and greenhouse power use

Farm teams can use sub-metering to compare pump and greenhouse loads. Operational monitoring and utility billing have different approval requirements.

Specifications & version options

Electrical system
Single-phase two-wire; 220 / 230 / 240 VAC; 50 Hz
Voltage range
0.6-1.2 Un
Current
0.25-5(100) A direct-connected; starting current 0.4% Ib
Accuracy
Class 1 active energy; Class 2 reactive energy
Communication
Plug-in PLC / RF / GPRS / 3G / LTE; RS485 and infrared optional
Meter functions
Import / export energy, multi-tariff, maximum demand, event and load-control functions
Show 3 more specification rows

Equipment quotation

The quotation lists the selected equipment, accessories, price and delivery terms.

Purchasing and delivery details →

Documents and downloads

Selection guidance and application documents. Wiring, register maps and certificates must match the chosen model and version.

Open family selection sheet

English · Web page · printable
Online selection guide

View application guide (PDF)

Application selection guide
PDF · English

Model-specific documents

Tell us which wiring, protocol or calibration documents you need for the equipment.

On this page
Application guide and product-family selection sheet
For your configuration
  • Exact-model datasheet
  • Wiring / pinout
  • Register map, protocol or sample data
  • Model-specific certificates
  • Calibration and measurement evidence
  • Dimensions / installation drawing
Project starter files →
Request an engineering package →
From a product family to your order
  1. Family page

    Compare uses, interfaces and configuration options. These are selection references.

  2. Equipment configuration

    Define the required function, interfaces, power, mounting and accessories for the site.

  3. Written quotation

    Confirm the exact model, configuration, photograph, document revisions, accessories, price, delivery and warranty.

Get selection help

Tell us what you want to measure and where. Send a model number or site photo if you have one.

Text stays in this tab for up to 30 minutes while you browse. Saving across reloads is optional below.

A personal email is welcome.

A country and general site description are enough. If the location is undecided, say so.

Photos, model information or BOM (optional)

Up to 5 files, 10 MB each. PDF, JPG, PNG, WebP, CSV, TXT, DOCX or XLSX.

By submitting this form, you acknowledge the privacy notice.

See where the system fits

Equipment in the system

Example equipment arrangement. Check compatibility and agree who handles software, PLC/SCADA programming and site installation.

SG-RTU-145: Water Level Telemetry Terminal

Product photograph

Pictured: SG-RTU-145 — Water Level Telemetry Terminal.

Meter configuration and connection limits

This single-phase meter connects directly to the circuit and accepts a selected communication module.

  • The electrical topology is single-phase two-wire. Three-phase circuits and DIN-rail installations require a different meter family.
  • The current specification is 0.25-5(100) A for direct connection; it is not an external-CT meter configuration.
  • PLC, RF and cellular communications are plug-in configuration choices. They are not simultaneous built-in 4G, LoRaWAN and Wi-Fi features.
Show 2 more selection notes

Continue product selection

Compare related equipment and connection options.

How to choose

  • Use this specified product only for a single-phase two-wire circuit. Specify a different meter family for three-phase or external-CT architectures.
  • Confirm 220, 230 or 240 VAC service and a direct-connected current within 0.25-5(100) A.
  • State whether readings are for operational monitoring, tenant allocation or regulated billing; local accuracy, metrology and utility acceptance requirements differ.
  • Choose one documented plug-in communication path - PLC, RF or cellular - from the site network and destination-market requirements. RS485 is optional.
Show 2 more selection checks

Compatible with

  • Single-phase two-wire 220 / 230 / 240 VAC circuits within the direct-connected current range
  • Plug-in PLC, RF or cellular communication modules selected for the project
  • Optional RS485 and infrared local communication interfaces
  • AMI or customer data systems after the protocol, point list and integration responsibility are confirmed

Typical package

  • Single-phase direct-connected smart meter
  • Selected plug-in PLC, RF or cellular communication module
  • Optional RS485 interface where required by the data path
  • Meter box, upstream protection, isolation and wiring accessories selected by the local electrical design
  • Integration checklist covering protocol, credentials, endpoint, reporting interval and acceptance readings

Applications

SG-RTU-157: Industrial Telemetry Remote Terminal Unit

Product photograph. Pictured: SG-RTU-157 — Industrial Telemetry Remote Terminal Unit.

Match the electrical ratings, current-sensor arrangement, gateway and panel wiring.

Use this meter for single-phase commercial or residential energy measurement when remote reading is required through a selected communication module. Choose a separate three-phase or DIN-rail meter family for those circuit and mounting requirements. Communication, metering purpose and local approval requirements are confirmed before quotation.

  • Single-phase remote meter reading for farm buildings and equipment
  • Distributed farm submetering where each point requires a local display and selectable communications
  • AMI retrofit projects using project-specific PLC, RF or cellular modules
  • Operational energy monitoring when the customer system can accept the confirmed meter protocol
See related application hardware

Related selection guides

Related resources

Frequently asked questions

Can this be configured as a wireless IoT energy meter?

Yes. A selected plug-in RF or cellular module can provide the remote communication path. PLC and optional RS485 are separate project configurations, and the ordered module, protocol, carrier or frequency must be confirmed before quotation.

Is this a three-phase DIN-rail energy meter?

No. The hardware is a single-phase two-wire direct-connected smart meter. Use a separate three-phase meter family when the circuit is three-phase.

Which remote communication options are available?

The product documentation lists plug-in PLC, RF and cellular communication modules, plus optional RS485 and infrared interfaces. The ordered module and protocol are confirmed for the destination network and integration.

Can it upload directly to any cloud platform?

Direct upload depends on the selected communication module and receiving system. Confirm the protocol, endpoint, credentials, reporting interval and data ownership before quotation.

What current range does the meter support?

The direct-connected configuration is rated 0.25-5(100) A. Circuits outside that range require a different meter or CT-operated architecture.

Can this meter be used for revenue billing?

Billing use requires confirmation of the accuracy class, local metrology rules, utility acceptance and certificates for the ordered model and destination market. Approval in one market does not establish approval in another.

Will it work with my existing system?

Use the listed inputs, power and protocol to match the device to your controller. Send its model or an input photo with the equipment request.