Skip to content
SunGeneAgricultural IoT
← Back to product
SunGene
Agricultural IoT
Product Family Selection Sheet
SG-EM-218: Single-Phase Direct-Connected AMI Smart Meter

Single-Phase Smart Energy Meter

Single-phase direct-connected smart meter for farm-building submetering, with plug-in PLC, RF or cellular communication modules and optional RS485 for remote reading.

Category: Energy & Utility Metering

Pictured: SG-EM-218 — Single-Phase Direct-Connected AMI Smart Meter.

Specifications & version options

Electrical systemSingle-phase two-wire; 220 / 230 / 240 VAC; 50 Hz
Voltage range0.6-1.2 Un
Current0.25-5(100) A direct-connected; starting current 0.4% Ib
AccuracyClass 1 active energy; Class 2 reactive energy
CommunicationPlug-in PLC / RF / GPRS / 3G / LTE; RS485 and infrared optional
Meter functionsImport / export energy, multi-tariff, maximum demand, event and load-control functions
DisplayLCD
Environment-25 to +70 °C; RH <=95%; IP54
Dimensions240 × 136 × 72 mm; approximately 0.7 kg

Meter configuration and connection limits

This single-phase meter connects directly to the circuit and accepts a selected communication module.

  • The electrical topology is single-phase two-wire. Three-phase circuits and DIN-rail installations require a different meter family.
  • The current specification is 0.25-5(100) A for direct connection; it is not an external-CT meter configuration.
  • PLC, RF and cellular communications are plug-in configuration choices. They are not simultaneous built-in 4G, LoRaWAN and Wi-Fi features.
  • RS485 is optional. The exact protocol profile, communication module, carrier or frequency and data endpoint are confirmed for the ordered configuration.
  • Use for regulated billing only after the required local utility, metrology and certification acceptance has been confirmed.

Typical applications

  • Single-phase remote meter reading for farm buildings and equipment
  • Distributed farm submetering where each point requires a local display and selectable communications
  • AMI retrofit projects using project-specific PLC, RF or cellular modules
  • Operational energy monitoring when the customer system can accept the confirmed meter protocol

Inquiries: contact@sungeneiot.com · sungeneiot.com

Select the required measurements and connection options from this sheet. Include the quantity, destination and accessories in your equipment request.