Skip to content
SunGeneAgricultural IoT
← All products
LoRaWAN Temperature & Humidity Data Logger: Temperature / RH → LoRaWAN link → Compatible gateway → Receiving system.

LoRaWAN Temperature & Humidity Data Logger — connection diagram.

LoRaWAN Temperature & Humidity Data Logger

Equipment options & specifications

Battery-powered LoRaWAN temperature and humidity logger with built-in flash, BLE 5.0 setup, selectable regional bands and ±0.2 °C temperature accuracy over 0 to 60 °C.

Related application hardware: Farm pump & energy monitoring

Where this equipment fits

SG-WS-162: Ultrasonic All-in-One Automatic Weather Station
Pictured: SG-WS-162 — Ultrasonic All-in-One Automatic Weather Station.

Follow greenhouse or crop-storage conditions

Collect temperature and humidity near the area being managed. Keep the probe clear of direct heat sources and choose a sensor rated for the actual location.

Check crop-storage and farm equipment rooms

The same measurements can support farm storage records. Confirm the enclosure limits and data path; refrigerated rooms may need a suitable probe and placement away from door drafts.

Specifications & version options

Measurement
Temperature and relative humidity; external-probe version available
Temperature accuracy
±0.2 °C from 0 to 60 °C
Humidity accuracy
Typical ±1.8%
LoRaWAN
Version 1.0.3; EU868 / AU915 / US915 / AS923 / IN865 / KR920 / RU864
Local configuration
Bluetooth 5.0
Offline records
Built-in flash with upload after connectivity returns
Show 3 more specification rows

Equipment quotation

The quotation lists the selected equipment, accessories, price and delivery terms.

Purchasing and delivery details →

Documents and downloads

Selection guidance and application documents. Wiring, register maps and certificates must match the chosen model and version.

Open family selection sheet

English · Web page · printable
Online selection guide

View application guide (PDF)

Application selection guide
PDF · English

Model-specific documents

Tell us which wiring, protocol or calibration documents you need for the equipment.

On this page
Application guide and product-family selection sheet
For your configuration
  • Exact-model datasheet
  • Wiring / pinout
  • Register map, protocol or sample data
  • Model-specific certificates
  • Calibration and measurement evidence
  • Dimensions / installation drawing
Project starter files →
Request an engineering package →
From a product family to your order
  1. Family page

    Compare uses, interfaces and configuration options. These are selection references.

  2. Equipment configuration

    Define the required function, interfaces, power, mounting and accessories for the site.

  3. Written quotation

    Confirm the exact model, configuration, photograph, document revisions, accessories, price, delivery and warranty.

Get selection help

Tell us what you want to measure and where. Send a model number or site photo if you have one.

Text stays in this tab for up to 30 minutes while you browse. Saving across reloads is optional below.

A personal email is welcome.

A country and general site description are enough. If the location is undecided, say so.

Photos, model information or BOM (optional)

Up to 5 files, 10 MB each. PDF, JPG, PNG, WebP, CSV, TXT, DOCX or XLSX.

By submitting this form, you acknowledge the privacy notice.

See where the system fits

Equipment in the system

Example equipment arrangement. Check compatibility and agree who handles software, PLC/SCADA programming and site installation.

SG-RTU-145: Water Level Telemetry Terminal

Product photograph

Pictured: SG-RTU-145 — Water Level Telemetry Terminal.

Select the radio region, probe and battery as one configuration

Check the measurement and communication specifications below. Reporting behavior, payload, ingress rating and documentation remain part of the ordered configuration.

  • The radio protocol is LoRaWAN 1.0.3. Supported regional plans include EU868, AU915, US915, AS923, IN865, KR920 and RU864; the ordered region is fixed before shipment.
  • Temperature accuracy is ±0.2 °C from 0 to 60 °C. Humidity accuracy is listed as a typical ±1.8%.
  • Built-in flash stores records while the network is unavailable and supports upload after connectivity is restored.
Show 3 more selection notes

Continue product selection

Compare related equipment and connection options.

How to choose

  • Use the LoRaWAN 1.0.3 path rather than treating generic LoRa and LoRaWAN as interchangeable; the logger, gateway and network server must share the selected regional plan.
  • Choose the internal-sensor or external-probe configuration from the monitored space, response requirement and cable placement.
  • Define the required accuracy, alarm thresholds and any calibration or traceability documents for cold-chain or controlled-environment use.
  • Set reporting, alarm and offline-recovery behavior from the required response time and battery-life target.
Show 2 more selection checks

Compatible with

  • LoRaWAN gateways and network servers using the selected EU868, AU915, US915, AS923, IN865, KR920 or RU864 regional plan
  • BLE 5.0 configuration from a compatible commissioning device
  • Cold-room, logistics, warehouse and equipment-room monitoring workflows that can use decoded temperature and humidity payloads
  • Customer platforms connected through the selected LoRaWAN network server after the payload format, decoder and delivery interface are confirmed

Typical package

  • LoRaWAN temperature and humidity data logger in the selected internal-sensor or external-probe configuration
  • One selected power version: 10,400 mAh replaceable battery, 2,200 mAh Ni-MH rechargeable battery or 4,000 mAh Li-Po rechargeable battery
  • Regional-frequency LoRaWAN gateway coverage and network-server access
  • Mounting, placement and environmental review for the monitored room, cabinet, shipment or outdoor point
  • Payload decoder, reporting interval, alarm thresholds and offline-data recovery acceptance test

Applications

SG-THS-122: Wireless Environmental and Condition Monitoring Sensors

Product photograph. Pictured: SG-THS-122 — Wireless Environmental and Condition Monitoring Sensors.

Select the sensor set, mast, solar supply, enclosure and probe positions for the crop and site.

Use this LoRaWAN data logger when a room, cabinet, shipment or remote site needs battery-powered temperature and humidity records without local Ethernet or cellular wiring. The device stores readings in built-in flash when the LoRaWAN path is unavailable and uploads them after connectivity returns. Select the regional radio plan, internal sensor or external probe, battery version, reporting interval and alarm behavior before quotation.

  • Temperature and humidity records for crop cold rooms, refrigerated produce storage and transport
  • Farm equipment-room, cabinet and produce-store environmental monitoring
  • Remote indoor or outdoor points where battery power and LoRaWAN coverage are available
  • Local data retention during temporary gateway or network-server outages
  • Threshold alarms and trend data for operational monitoring, not regulated calibration or safety shutdown
See related application hardware

Related selection guides

Related resources

Frequently asked questions

Is this a LoRaWAN temperature and humidity data logger?

Yes. The device uses LoRaWAN 1.0.3 and supports EU868, AU915, US915, AS923, IN865, KR920 and RU864 regional plans. The project must select one compatible region across the logger, gateway and network server.

What measurement accuracy is listed in the datasheet?

Temperature accuracy is ±0.2 °C from 0 to 60 °C. Humidity accuracy is listed as a typical ±1.8%. For regulated cold-chain or calibration-controlled use, the required traceability and calibration documents must be specified separately.

What happens if the LoRaWAN connection is interrupted?

The logger has built-in flash storage. It can retain readings while the network is unavailable and upload the stored records after connectivity is restored. Storage capacity, reporting interval and recovery acceptance criteria are confirmed for the project.

Which battery version should I choose?

The versions use either a 10,400 mAh replaceable battery, a 2,200 mAh Ni-MH rechargeable battery or a 4,000 mAh Li-Po rechargeable battery. Choose from the deployment duration, reporting and alarm intervals, charging access and temperature conditions.

Is the published 7 km LoRa distance guaranteed at my site?

No. Up to 7 km is specified for urban open space. Installed coverage depends on buildings, terrain, antenna placement, regional settings and gateway height. Plan the link with a site coverage review or pilot test.

Does every unit include an external probe?

No. An external-probe version is available, but the ordered sensor configuration must be written into the quotation. Confirm the probe, cable and battery version required for your installation before ordering.

Will it work with my existing system?

Use the listed inputs, power and protocol to match the device to your controller. Send its model or an input photo with the equipment request.