Illustration: outdoor monitoring station with weather sensor, solar supply, enclosure and field probe.
Plan a monitoring point away from mains power
Start with the sensors, collector and reporting schedule. Solar and battery sizing depends on their load, local weather and the required operating time without charging.
Protect equipment at exposed locations
Remote water and environmental sites need a suitable mounting and enclosure arrangement. Cable entries, heat, grounding and surge protection are checked for the assembled system.
Specifications & version options
Supplied configuration
60 W solar panel + 12 V / 10 A controller
Controller voltage
Automatic 12/24 VDC system detection
Rated current / modes
10 A / four selectable work modes
Protection / temperature
IP67 / -40 to +70 °C
Electrical protection
Overload, short circuit, reverse polarity and battery under/over-voltage
Battery scope
Not included; size and purchase locally for the required autonomy
Need to connect this equipment to an existing controller or platform?
Share your current model, a photo or the connection you need. We help assess interfaces, power and the required configuration.
Public documents describe this product family and selection options. Wiring, register maps and compliance documents must match the model and version selected for your order.
The verified supplied configuration is a 60 W solar panel with a 12/24 V, 10 A controller; confirm the monitoring-node load before using this configuration.
The battery is not included. Select and purchase it locally from the required system voltage, daily load, climate and autonomy target.
Check steady-state and startup current against the controller rating, especially for cellular gateways and heated instruments.
Provide the mounting method and cable run so panel brackets, wiring and weather protection can be confirmed separately.
Compatible with
4G/LTE RTU gateway
LoRaWAN gateway or node
Weather station
Tank level sensor package
Typical package
60 W solar panel
12/24 V, 10 A charge controller
Panel-to-controller cable
Battery selected and purchased locally (not included)
Applications
Sensor set, mast, solar supply, enclosure and probe placement are selected for the crop and site.
Use this kit to power a low-load monitoring node at a site without reliable mains power. The supply package is a 60 W solar panel with an IP67 12/24 V, 10 A controller. Confirm the connected device load, local solar conditions and required autonomy before using this configuration.
Remote water-level, pump and tank monitoring sites
Weather and agricultural sensor stations
Low-load RTU, gateway or wireless-node power after load review
Off-grid pilots where the battery can be sized and purchased locally
The supplied configuration is a 60 W solar panel, a 12/24 V controller rated at 10 A, and the panel-to-controller cable. The battery is not included.
How should the battery be selected?
Size and purchase the battery locally from the system voltage, daily energy use, startup current, local solar conditions and required autonomy. A 60 W panel is not automatically suitable for every RTU, gateway, heater or instrument load.
What controller limits and protection apply to this model?
The controller supports automatic 12/24 V system detection, a 10 A rating, four selectable work modes, IP67 protection and -40 to +70 °C operation. It includes overload, short-circuit, reverse-polarity and battery under/over-voltage protection.
What should I provide when requesting a quote for the Solar Field Power Kit?
Powered device(s), voltage and consumption (W or A); Daily runtime / reporting interval; Required battery autonomy and local climate; Mounting method and cable length
Where can I compare available model options?
Open the Application selection guide linked on this page. Use it to compare equipment options before requesting a configuration.
Will it work with my existing system?
Check the field signal, supply, protocol and receiving platform against the selected model. The connection options listed on this page are a starting point; send your equipment model or interface document so we can check the combination before ordering.
Product-family reference. Final ordered model and specifications are confirmed in the written quotation.
