Skip to content
SunGeneAgricultural IoT
All problem guides

Problem / solution guide

Temperature Alerts for Farm Produce Cold Rooms

Plan temperature records and alerts for stored farm produce. Compare probes, door inputs, communication and the response to a sustained excursion.

Hardware in this guide

Product-family illustrations. See each product page for specifications and options.

Planning example

A produce cold room with frequent loading

Keep the original temperature record while distinguishing a brief door opening from a sustained excursion.

  1. 01

    Place the probe

    Review the stored goods, doors, evaporators and airflow with the storage team.

  2. 02

    Select the connection

    Choose wired or suitable wireless collection for the room and walls.

  3. 03

    Set the event rule

    Agree the temperature threshold and duration with the person responsible for storage.

  4. 04

    Test recovery

    Check delivery, acknowledgement and recovery after a controlled door-opening test.

Select the probe range and calibration for the storage requirement. Product condition and acceptance remain with the responsible produce team.

What does the farm need to check?

Send the room count, required temperature range, country and a layout or photo. Include probe placement, wall material, network and calibration requirements.

Problem to solve

A produce room needs a temperature record that represents the stored goods. Agree the storage limit, allowed duration and person responding before setting an alert.

Measurements that matter

  • Temperature and humidity
  • Door open status
  • Power failure or offline state
  • Alarm duration and timestamp

Suggested hardware configuration

  • Temperature humidity sensor
  • Door or power status input
  • LoRaWAN, NB-IoT or 4G gateway
  • Alarm routing to customer workflow

Equipment in the system

Example equipment arrangement. Check compatibility and agree who handles software, PLC/SCADA programming and site installation.

Information needed before quotation

  • Temperature range and accuracy
  • Room count and wall material
  • Alarm recipients
  • Calibration or certificate expectation

Recommended next steps

  • Review cold chain monitoring
  • Compare wired and wireless sensors
  • Request a pilot sensor set

Related pages

FAQ

What should I send for equipment selection and a quote?

Send the room count, required temperature range, country and a layout or photo. Include probe placement, wall material, network and calibration requirements.

Where should the temperature probe be placed?

Choose a point that represents the stored goods and note doors, evaporators and direct airflow. Check the probe range and calibration requirements, then compare its reading with a reference during installation.

How do we avoid treating every door opening as an emergency?

Agree the temperature limit and allowed duration with the person responsible for storage. Test door-opening and recovery conditions before enabling escalation, keeping the original readings available for review.