Skip to content
SunGeneAgricultural IoT
All resources

Equipment selection guide

4G LTE Farm Monitoring Equipment Plan

Plan a farm monitoring equipment list with compatible sensors, a 4G RTU or gateway, field power, enclosure and the required data connection.

Product-family illustrations

Compare individual equipment specifications ↓

SunGene Agricultural IoT

  1. 1. Purpose

    Collect several farm measurements through a cellular data connection.

  2. 2. Suitable sites

    Irrigation pumps, storage tanks, weather points and remote growing areas.

  3. 3. What to send

    Send the country, sensor list, required readings, available power, operator and receiving application.

Site conditions to check

Compare power, communication and equipment requirements for irrigation, pumps, soil and weather monitoring.

Choose equipment for your farm

Send the country, measurements, existing instruments, power and network, and where your team needs the readings.

When to use this guide

Plan a small farm installation before extending it to more points. List each measurement, its output and supply, then choose the cellular receiver, field power and data destination.

Individual equipment specifications

outdoor monitoring station with weather sensor, solar supply, enclosure and field probe

An outdoor monitoring station

Illustration: outdoor monitoring station with weather sensor, solar supply, enclosure and field probe.

See where the system fits

Build the list from the farm measurements

List water level, flow, pressure, pH or EC, soil conditions, weather readings and pump contacts as separate points. Record the range, output and supply for each instrument. Keep soil EC and water EC as separate measurements.

Choose the cellular receiver and data path

Match the sensors to the documented inputs and Modbus collection of the selected RTU or gateway. The documented RTU configuration supports MQTT and transparent TCP / UDP. Include the target country, operator, LTE bands, SIM/APN, antenna and receiving endpoint with the equipment list.

Plan mounting and power together

Include the enclosure, cable entries, protective devices, mounting and maintenance access. Calculate the complete sensor, receiver and modem load before sizing a solar supply or battery. Local pump control, overflow protection and electrical safety remain with the site installation.

Plan the equipment and data connection

  1. Measure at the farm

    Separate sensor readings and pump contacts matched to the farm task.

  2. Match the connection

    Compatible RTU inputs, the country and operator’s cellular configuration, and complete field power.

  3. Use the readings

    The agreed MQTT or transparent TCP / UDP data path and receiving records.

Example equipment and data path. Select each instrument, receiver, power supply and receiving interface as part of the equipment list.

Key points

  • Separate sensor points with documented outputs
  • 4G receiver selected for the country and operator
  • Enclosure, antenna, mounting and complete field power
  • Defined records, integration tests and site responsibilities

Technologies

  • 4G LTE
  • RS485
  • Modbus RTU
  • MQTT
  • Field power
  • Outdoor enclosure selection

Related pages

Official technical references

Protocol specifications for the connections described in this guide.

FAQ

What is included in a farm equipment plan?

The plan identifies the selected sensors, receiver, antenna, field power, enclosure and accessories. It also assigns the receiving application, integration work and local installation responsibilities.

What should I send for a quotation?

Send the country, measurement list, approximate point count, sensor outputs or register maps, operator, power source, receiving application and quantity. A site photo or layout helps with mounting and connections.

How do the readings reach our application?

The selected RTU or gateway delivers the agreed fields through its documented interface. The documented RTU configuration supports MQTT or transparent TCP / UDP. Include any additional protocol conversion, authentication and data storage in the integration scope.

Get selection help

Tell us what you want to measure and where. Send a model number or site photo if you have one.

Text stays in this tab for up to 30 minutes while you browse. Saving across reloads is optional below.

A personal email is welcome.

A country and general site description are enough. If the location is undecided, say so.

Photos, model information or BOM (optional)

Up to 5 files, 10 MB each. PDF, JPG, PNG, WebP, CSV, TXT, DOCX or XLSX.

By submitting this form, you acknowledge the privacy notice.