Skip to content
SunGeneAgricultural IoT
← All products
SG-EM-206: Three-Phase DIN-Rail Multi-Tariff Energy Meter

Pictured: SG-EM-206 — Three-Phase DIN-Rail Multi-Tariff Energy Meter.

DIN-Rail Three-Phase Energy Meter

Equipment options & specifications

Four-module three-phase DIN-rail meter family for panel energy monitoring, with direct-connected 80 A or 100 A configurations and RS485 Modbus on selected variants.

Related application hardware: Farm pump & energy monitoring

Where this equipment fits

SG-EM-201: Single-phase DIN-rail energy meter
Pictured: SG-EM-201 — Single-phase DIN-rail energy meter.

Compare power use during irrigation

Bring pump or farm-panel readings into an operating record. Select the meter around the circuit, wiring and current input, then agree how the readings reach your system.

Compare pump and greenhouse power use

Farm teams can use sub-metering to compare pump and greenhouse loads. Operational monitoring and utility billing have different approval requirements.

Specifications & version options

Configuration
Three-phase four-wire, direct connected
Rated system
3 x 230/400 V; 50 Hz (50/60 Hz on a specific model)
Direct-connected current
Up to 80 A or 100 A, depending on the selected family
Measurements
Active energy, V, A, power and Hz; reactive energy / PF on selected variants
Active-energy accuracy
Class 1.0 or Class B, depending on the selected family
Communication
RS485 variants; Modbus RTU on selected configurations
Show 5 more specification rows

Equipment quotation

The quotation lists the selected equipment, accessories, price and delivery terms.

Purchasing and delivery details →

Documents and downloads

Selection guidance and application documents. Wiring, register maps and certificates must match the chosen model and version.

Open family selection sheet

English · Web page · printable
Online selection guide

View application guide (PDF)

Application selection guide
PDF · English

Model-specific documents

Tell us which wiring, protocol or calibration documents you need for the equipment.

On this page
Application guide and product-family selection sheet
For your configuration
  • Exact-model datasheet
  • Wiring / pinout
  • Register map, protocol or sample data
  • Model-specific certificates
  • Calibration and measurement evidence
  • Dimensions / installation drawing
Project starter files →
Request an engineering package →
From a product family to your order
  1. Family page

    Compare uses, interfaces and configuration options. These are selection references.

  2. Equipment configuration

    Define the required function, interfaces, power, mounting and accessories for the site.

  3. Written quotation

    Confirm the exact model, configuration, photograph, document revisions, accessories, price, delivery and warranty.

Get selection help

Tell us what you want to measure and where. Send a model number or site photo if you have one.

Text stays in this tab for up to 30 minutes while you browse. Saving across reloads is optional below.

A personal email is welcome.

A country and general site description are enough. If the location is undecided, say so.

Photos, model information or BOM (optional)

Up to 5 files, 10 MB each. PDF, JPG, PNG, WebP, CSV, TXT, DOCX or XLSX.

By submitting this form, you acknowledge the privacy notice.

See where the system fits

Equipment in the system

Example equipment arrangement. Check compatibility and agree who handles software, PLC/SCADA programming and site installation.

SG-RTU-145: Water Level Telemetry Terminal

Product photograph

Pictured: SG-RTU-145 — Water Level Telemetry Terminal.

Select the electrical and communication variant before quotation

These direct-connected three-phase DIN-rail meters have model-dependent functions. Check the ordered model for the features you need.

  • The electrical system is three-phase four-wire, 3 x 230/400 V at 50 Hz; 50/60 Hz is available on a specific model.
  • Choose the direct-connected 80 A or 100 A family from the actual maximum circuit current. CT input is outside this product range.
  • Available multifunction variants measure active energy, voltage, current, power and frequency. Reactive energy and power factor depend on the selected family and configuration.
Show 3 more selection notes

Continue product selection

Compare related equipment and connection options.

How to choose

  • Confirm a three-phase four-wire, 3 x 230/400 V circuit before selecting this direct-connected family.
  • Choose the 80 A or 100 A family from the actual maximum circuit current and protective-device arrangement. Use a separately verified CT-operated family when direct connection is unsuitable.
  • List the required measurements. Active energy, voltage, current, power and frequency are in the available multifunction scope; reactive energy and power factor depend on the selected configuration.
  • Choose RS485 Modbus or SO pulse output and provide the connected gateway, logger or PLC. RS485, Modbus registers and serial settings are not assumed for every variant.
Show 2 more selection checks

Compatible with

  • Three-phase four-wire panel circuits using the selected direct-connected 80 A or 100 A meter family
  • RS485 Modbus masters, gateways and data loggers when the ordered meter variant includes RS485
  • Pulse counters and loggers when the ordered meter variant includes an SO active-energy output
  • SCADA, BMS or customer platforms through a separately selected gateway or data-acquisition path

Typical package

  • Selected direct-connected 80 A or 100 A three-phase four-wire DIN-rail meter
  • Selected RS485 Modbus or SO pulse-output configuration
  • Wiring diagram, communication settings and applicable register map
  • Gateway or data logger when remote collection is required
  • Panel protection, isolation and terminal hardware specified by the responsible electrician

Applications

SG-RTU-157: Industrial Telemetry Remote Terminal Unit

Product photograph. Pictured: SG-RTU-157 — Industrial Telemetry Remote Terminal Unit.

Match the electrical ratings, current-sensor arrangement, gateway and panel wiring.

Use this family for direct-connected three-phase four-wire sub-metering in an indoor electrical panel. Selection starts with the 3 x 230/400 V system and maximum circuit current, then fixes the 80 A or 100 A family, required measurements, RS485 or pulse output, register map and compliance use. It is not a CT-operated meter family, and regulated billing use requires destination-specific approval before use.

  • Three-phase panel sub-metering for farm pump rooms and greenhouses
  • Farm solar and equipment circuits within the selected direct-connected current limit
  • Energy-data acquisition through an RS485 Modbus gateway on the selected communication variant
  • Local energy pulse collection using the selected SO output variant
See related application hardware

Related selection guides

Related resources

Frequently asked questions

Is this a direct-connected or CT-operated three-phase meter?

This product family is direct connected. The documented families are selected for up to 80 A or 100 A, depending on the ordered configuration. Circuits that require external current transformers need a separately verified CT-operated meter family.

Does every version include RS485 Modbus RTU?

No. RS485 is available on documented variants, and Modbus RTU applies to selected configurations. Confirm the ordered communication option, baud rate, parity, device addressing and register map before quotation.

Which electrical measurements are available?

The available multifunction variants include active energy, voltage, current, power and frequency. Reactive energy and power factor depend on the selected family and configuration, so the required measurement list is fixed in the quotation.

Can this meter be used for regulated utility billing?

Do not assume that it can. Destination-country approval, utility acceptance, markings and certification scope must be confirmed for the exact ordered configuration before any regulated billing use.

Will it work with my existing system?

Use the listed inputs, power and protocol to match the device to your controller. Send its model or an input photo with the equipment request.