Skip to content
SunGeneAgricultural IoT
← All products
Temperature & Humidity Panel Instrument: Measurement point → Sensor output → Logger or gateway → Customer records.

Temperature & Humidity Panel Instrument — connection diagram.

Temperature & Humidity Panel Instrument

Equipment options & specifications

Panel instrument for local temperature and humidity indication, with the probe, range and analog or RS485 output selected for the project.

Related application hardware: Farm pump & energy monitoring

Where this equipment fits

SG-WS-162: Ultrasonic All-in-One Automatic Weather Station
Pictured: SG-WS-162 — Ultrasonic All-in-One Automatic Weather Station.

Follow greenhouse or crop-storage conditions

Collect temperature and humidity near the area being managed. Keep the probe clear of direct heat sources and choose a sensor rated for the actual location.

Check crop-storage and farm equipment rooms

The same measurements can support farm storage records. Confirm the enclosure limits and data path; refrigerated rooms may need a suitable probe and placement away from door drafts.

Specifications & version options

Measurement
Temperature and relative humidity
Output families
Standard analog, 0-10 V or RS485 options; select one for the order
Form
Panel instrument with matching remote probe
Project checks
Range, probe, supply, output, alarm or control role and panel cut-out

Equipment quotation

The quotation lists the selected equipment, accessories, price and delivery terms.

Purchasing and delivery details →

Documents and downloads

Selection guidance and application documents. Wiring, register maps and certificates must match the chosen model and version.

Open family selection sheet

English · Web page · printable
Online selection guide

View application guide (PDF)

Application selection guide
PDF · English

Model-specific documents

Tell us which wiring, protocol or calibration documents you need for the equipment.

On this page
Application guide and product-family selection sheet
For your configuration
  • Exact-model datasheet
  • Wiring / pinout
  • Register map, protocol or sample data
  • Model-specific certificates
  • Calibration and measurement evidence
  • Dimensions / installation drawing
Project starter files →
Request an engineering package →
From a product family to your order
  1. Family page

    Compare uses, interfaces and configuration options. These are selection references.

  2. Equipment configuration

    Define the required function, interfaces, power, mounting and accessories for the site.

  3. Written quotation

    Confirm the exact model, configuration, photograph, document revisions, accessories, price, delivery and warranty.

Get selection help

Tell us what you want to measure and where. Send a model number or site photo if you have one.

Text stays in this tab for up to 30 minutes while you browse. Saving across reloads is optional below.

A personal email is welcome.

A country and general site description are enough. If the location is undecided, say so.

Photos, model information or BOM (optional)

Up to 5 files, 10 MB each. PDF, JPG, PNG, WebP, CSV, TXT, DOCX or XLSX.

By submitting this form, you acknowledge the privacy notice.

See where the system fits

Equipment in the system

Example equipment arrangement. Check compatibility and agree who handles software, PLC/SCADA programming and site installation.

SG-RTU-145: Water Level Telemetry Terminal

Product photograph

Pictured: SG-RTU-145 — Water Level Telemetry Terminal.

Continue product selection

Compare related equipment and connection options.

How to choose

  • Define the measured cabinet or room, temperature and humidity range, required display and any alarm or control role.
  • Confirm probe type, placement and lead length, then select the matching standard analog, 0-10 V or RS485 product variant.
  • Check panel cut-out, supply, ambient conditions, destination input and acceptance points before selection.

Compatible with

  • Matching temperature and humidity probe selected with the panel instrument
  • 0-10 V or RS485 data path only on the corresponding ordered variant
  • PLC, gateway or BMS input matched to the selected output

Typical package

  • Panel temperature and humidity instrument
  • Compatible probe and cable length selected for the cabinet or room
  • Ordered analog or RS485 interface
  • Wiring schedule and acceptance points for the selected measurement path

Applications

SG-EM-201: Single-phase DIN-rail energy meter
Pictured: SG-EM-201 — Single-phase DIN-rail energy meter.

Use this panel instrument where temperature and humidity need to be displayed locally or passed to an upstream control system. Available configurations include standard analog, 0-10 V or RS485 outputs; the exact probe, range, supply, output and panel cut-out are confirmed together.

  • Farm cabinet and electrical-room temperature and humidity indication
  • Environmental data input to a PLC, gateway or BMS
  • Panel retrofit where the output and cut-out are confirmed before ordering
See related application hardware

Related selection guides

Related resources

Frequently asked questions

Does this instrument switch heaters or fans directly?

Temperature and humidity readings use the selected output family. Direct heater or fan switching requires a matching control configuration and load-rated switching equipment. Include the controller and load details in your request.

Which output should be selected?

Choose the matching standard analog, 0-10 V or RS485 variant for the PLC, gateway or BMS input. Probe, range, supply, output and panel cut-out are confirmed together.

Will it work with my existing system?

Use the listed inputs, power and protocol to match the device to your controller. Send its model or an input photo with the equipment request.