Skip to content
SunGeneAgricultural IoT
← Back to product
SunGene
Agricultural IoT
Product Family Selection Sheet
SG-EM-206: Three-Phase DIN-Rail Multi-Tariff Energy Meter

DIN-Rail Three-Phase Energy Meter

Four-module three-phase DIN-rail meter family for panel energy monitoring, with direct-connected 80 A or 100 A configurations and RS485 Modbus on selected variants.

Category: Energy & Utility Metering

Pictured: SG-EM-206 — Three-Phase DIN-Rail Multi-Tariff Energy Meter.

Specifications & version options

ConfigurationThree-phase four-wire, direct connected
Rated system3 x 230/400 V; 50 Hz (50/60 Hz on a specific model)
Direct-connected currentUp to 80 A or 100 A, depending on the selected family
MeasurementsActive energy, V, A, power and Hz; reactive energy / PF on selected variants
Active-energy accuracyClass 1.0 or Class B, depending on the selected family
CommunicationRS485 variants; Modbus RTU on selected configurations
Pulse outputSO active-energy output; 1000 imp/kWh in the product documentation
DisplayLCD; backlight and power-outage display are configuration dependent
EnclosureIP51 indoor panel installation
Mounting35 mm DIN rail, approximately four modules wide
Destination approvalDestination approval and billing suitability confirmed before order

Select the electrical and communication variant before quotation

These direct-connected three-phase DIN-rail meters have model-dependent functions. Check the ordered model for the features you need.

  • The electrical system is three-phase four-wire, 3 x 230/400 V at 50 Hz; 50/60 Hz is available on a specific model.
  • Choose the direct-connected 80 A or 100 A family from the actual maximum circuit current. CT input is outside this product range.
  • Available multifunction variants measure active energy, voltage, current, power and frequency. Reactive energy and power factor depend on the selected family and configuration.
  • RS485 is available on documented variants. Modbus RTU applies only to the selected configuration, and its register map and serial settings are confirmed before quotation.
  • Active-energy accuracy is Class 1.0 or Class B depending on the model. Confirm the applicable class and documents for the version you select.
  • The enclosure is IP51 for indoor panel installation on 35 mm DIN rail. Backlight, power-outage display, multi-tariff functions, markings and certificates are model dependent.

Typical applications

  • Three-phase panel sub-metering for farm pump rooms and greenhouses
  • Farm solar and equipment circuits within the selected direct-connected current limit
  • Energy-data acquisition through an RS485 Modbus gateway on the selected communication variant
  • Local energy pulse collection using the selected SO output variant

Inquiries: contact@sungeneiot.com · sungeneiot.com

Select the required measurements and connection options from this sheet. Include the quantity, destination and accessories in your equipment request.