Skip to content
SunGeneAgricultural IoT
← All products
SG-RTU-157: Industrial Telemetry Remote Terminal Unit

Pictured: SG-RTU-157 — Industrial Telemetry Remote Terminal Unit.

Multi-I/O Cellular RTU Gateway

Equipment options & specifications

Programmable cellular RTU for farm sites with many RS485, analog and digital signals — 3 RS485 ports, 12 analog inputs, 16 digital inputs, Ethernet, MQTT and relay control.

Related application hardware: Farm pump & energy monitoring

Where this equipment fits

SG-RTU-145: Water Level Telemetry Terminal
Pictured: SG-RTU-145 — Water Level Telemetry Terminal.

Bring existing farm equipment into one record

Connect compatible field signals to the selected collector. Start with the sensors and controller already on site, then agree units, timestamps and the destination for each reading.

Connect remote irrigation and weather points

Farm teams can use the same collection approach for remote irrigation and weather points. The required interfaces, power, network and buffering behavior must match the selected device.

Specifications & version options

Cellular uplink
FDD / TDD 4G and HSPA / UMTS; module and bands selected for the target country
Network interfaces
1 LAN, 1 WAN and 1 USB
Serial interfaces
3 × RS485 plus 1 × RS232
Digital I/O
12 dry-contact DI, 4 wet-contact DI (0-5V) and 2 relay outputs
Analog inputs
12 × 4-20mA / 0-5V, 12-bit
Protocols / functions
MQTT, Modbus RTU, TCP/IP, HTTP / HTTPS, VPN and programmable local scripts
Show 2 more specification rows

Equipment quotation

The quotation lists the selected equipment, accessories, price and delivery terms.

Purchasing and delivery details →

Documents and downloads

Selection guidance and application documents. Wiring, register maps and certificates must match the chosen model and version.

Open family selection sheet

English · Web page · printable
Online selection guide

View application guide (PDF)

Application selection guide
PDF · English

Model-specific documents

Tell us which wiring, protocol or calibration documents you need for the equipment.

On this page
Application guide and product-family selection sheet
For your configuration
  • Exact-model datasheet
  • Wiring / pinout
  • Register map, protocol or sample data
  • Model-specific certificates
  • Calibration and measurement evidence
  • Dimensions / installation drawing
Project starter files →
Request an engineering package →
From a product family to your order
  1. Family page

    Compare uses, interfaces and configuration options. These are selection references.

  2. Equipment configuration

    Define the required function, interfaces, power, mounting and accessories for the site.

  3. Written quotation

    Confirm the exact model, configuration, photograph, document revisions, accessories, price, delivery and warranty.

Get selection help

Tell us what you want to measure and where. Send a model number or site photo if you have one.

Text stays in this tab for up to 30 minutes while you browse. Saving across reloads is optional below.

A personal email is welcome.

A country and general site description are enough. If the location is undecided, say so.

Photos, model information or BOM (optional)

Up to 5 files, 10 MB each. PDF, JPG, PNG, WebP, CSV, TXT, DOCX or XLSX.

By submitting this form, you acknowledge the privacy notice.

See where the system fits

Equipment in the system

Example equipment arrangement. Check compatibility and agree who handles software, PLC/SCADA programming and site installation.

Existing field equipment

Confirm the device signals, electrical interface and register map before selecting the gateway.

Data destination

Customer platform or an agreed third-party service

SG-VIB-114: Industrial Accelerometer for Vibration Monitoring

Product photograph

Pictured: SG-VIB-114 — Industrial Accelerometer for Vibration Monitoring.

Continue product selection

Compare related equipment and connection options.

How to choose

  • List every RS485, RS232, analog, dry-contact, wet-contact and relay point; the value of this gateway is its high channel count, so the wiring schedule comes first.
  • Match the cellular module and frequency bands to the destination country and operator, then confirm the SIM, antennas, Ethernet addressing, VPN and remote-management rules.
  • Define MQTT or Modbus data ownership, polling, timestamps, local storage, offline behavior and the acceptance test before programming begins.
  • Review the 7.5-32 VDC supply, sensor-power outputs, cabinet space, pluggable terminals, cable entries and ambient temperature with the panel builder.

Compatible with

  • RS485 / Modbus field devices
  • 4-20mA or 0-5V transmitters
  • Dry- and wet-contact status inputs
  • Ethernet and cellular networks
  • MQTT or Modbus RTU data paths

Typical package

  • Multi-I/O cellular RTU gateway
  • Country-matched cellular module, SIM and antenna
  • Selected RS485, analog and digital field devices
  • 7.5-32 VDC supply
  • Cabinet or enclosure sized for the site and wiring

Applications

SG-RTU-161: 4G Telemetry Module in Protective Enclosure

Product photograph. Pictured: SG-RTU-161 — 4G Telemetry Module in Protective Enclosure.

Use this gateway when one remote site has many mixed signals: serial instruments, 4-20mA or 0-5V transmitters, dry-contact alarms and relay-controlled equipment. It combines high-channel-count field I/O, Ethernet and a country-matched cellular uplink in one programmable RTU.

  • Irrigation pump-station and farm water-site I/O collection
  • Remote farm environmental and equipment data acquisition
  • RS485 meter and sensor aggregation
  • Alarm input and relay output at unmanned sites
  • MQTT or Modbus RTU handoff to the customer system
See related application hardware

Related selection guides

Related resources

Frequently asked questions

How many field signals can this cellular RTU collect?

The specified configuration has 3 RS485 ports, 1 RS232 port, 12 dry-contact digital inputs, 4 wet-contact digital inputs, 12 analog inputs and 2 relay outputs. The ordered terminal assignment and sensor-power outputs are confirmed in the wiring schedule.

Which analog signals does it accept?

The documented analog inputs accept 4-20mA or 0-5V signals with 12-bit conversion. Share each transmitter type, range and wiring method so the channel plan can be checked before quotation.

How does the gateway connect to the customer system?

The functions include Ethernet, cellular 4G / 3G, MQTT, Modbus RTU, TCP/IP, HTTP / HTTPS and VPN support. The modem, bands, SIM, broker or SCADA destination, payload and security responsibilities are selected for the project.

Can it keep working when the network is unavailable?

Optional local data storage and a real-time clock are documented for this product family. The required storage duration, timestamp behavior and retransmission test must be agreed before the hardware configuration is released.

Will it work with my existing system?

Use the listed inputs, power and protocol to match the device to your controller. Send its model or an input photo with the equipment request.