Skip to content
SunGeneAgricultural IoT
← All products
SG-PM-240: Three-Phase Power Analyser

Pictured: SG-PM-240 — Three-Phase Power Analyser.

Multifunction Power Meter

Equipment options & specifications

Panel-mount three-phase multifunction power meter measuring voltage, current, power, power factor, frequency and energy, with RS485 Modbus for remote energy monitoring and sub-metering.

Related application hardware: Farm pump & energy monitoring

Where this equipment fits

SG-EM-201: Single-phase DIN-rail energy meter
Pictured: SG-EM-201 — Single-phase DIN-rail energy meter.

Compare power use during irrigation

Bring pump or farm-panel readings into an operating record. Select the meter around the circuit, wiring and current input, then agree how the readings reach your system.

Compare pump and greenhouse power use

Farm teams can use sub-metering to compare pump and greenhouse loads. Operational monitoring and utility billing have different approval requirements.

Specifications & version options

Measurement
V, A, kW, kvar, PF, Hz, kWh (three-phase)
Communication
RS485 (Modbus RTU)
Display
96 × 96 mm LCD panel instrument
Tariff function
Multi-tariff function documented for this product family
Current input
Ordered input arrangement confirmed from the single-line diagram
Accuracy
Required class confirmed for the quoted configuration

Equipment quotation

The quotation lists the selected equipment, accessories, price and delivery terms.

Purchasing and delivery details →

Documents and downloads

Selection guidance and application documents. Wiring, register maps and certificates must match the chosen model and version.

Open family selection sheet

English · Web page · printable
Online selection guide

View application guide (PDF)

Application selection guide
PDF · English

Model-specific documents

Tell us which wiring, protocol or calibration documents you need for the equipment.

On this page
Application guide and product-family selection sheet
For your configuration
  • Exact-model datasheet
  • Wiring / pinout
  • Register map, protocol or sample data
  • Model-specific certificates
  • Calibration and measurement evidence
  • Dimensions / installation drawing
Project starter files →
Request an engineering package →
From a product family to your order
  1. Family page

    Compare uses, interfaces and configuration options. These are selection references.

  2. Equipment configuration

    Define the required function, interfaces, power, mounting and accessories for the site.

  3. Written quotation

    Confirm the exact model, configuration, photograph, document revisions, accessories, price, delivery and warranty.

Get selection help

Tell us what you want to measure and where. Send a model number or site photo if you have one.

Text stays in this tab for up to 30 minutes while you browse. Saving across reloads is optional below.

A personal email is welcome.

A country and general site description are enough. If the location is undecided, say so.

Photos, model information or BOM (optional)

Up to 5 files, 10 MB each. PDF, JPG, PNG, WebP, CSV, TXT, DOCX or XLSX.

By submitting this form, you acknowledge the privacy notice.

See where the system fits

Equipment in the system

Example equipment arrangement. Check compatibility and agree who handles software, PLC/SCADA programming and site installation.

SG-RTU-145: Water Level Telemetry Terminal

Product photograph

Pictured: SG-RTU-145 — Water Level Telemetry Terminal.

Continue product selection

Compare related equipment and connection options.

How to choose

  • Confirm phase and wiring system, nominal voltage, maximum current and whether CT / PT inputs are required.
  • List the measurements needed for the operating decision, including energy, demand, power factor, harmonics or alarm outputs.
  • Match display size, panel cut-out, accuracy, communication and register map to the switchboard and upstream system.

Compatible with

  • Three-phase panel systems after voltage, wiring and current-input arrangement are checked
  • RS485 Modbus RTU master, data-acquisition gateway or BMS interface
  • External CTs or direct-current input only where the ordered meter configuration supports them

Typical package

  • Three-phase multifunction panel meter from this product family
  • Current-input arrangement and protection selected from the single-line diagram
  • RS485 wiring to the chosen gateway, PLC or BMS
  • Register list, CT ratio and commissioning record for the ordered configuration

Applications

SG-RTU-157: Industrial Telemetry Remote Terminal Unit

Product photograph. Pictured: SG-RTU-157 — Industrial Telemetry Remote Terminal Unit.

Match the electrical ratings, current-sensor arrangement, gateway and panel wiring.

Use this panel meter for three-phase operating data and sub-metering where a local display and RS485 data path are required. Confirm the wiring system, current input, accuracy requirement, panel cut-out and register list from the single-line diagram before selecting the meter.

  • Farm electrical sub-metering and data for operating dashboards
  • Panel data collection through an RS485 gateway or BMS
  • Three-phase voltage, current, power, power factor, frequency and energy review
See related application hardware

Related selection guides

Related resources

Frequently asked questions

Which electrical values does this meter report?

This product family reports three-phase voltage, current, active and reactive power, power factor, frequency and energy. RS485 Modbus is available for upstream data collection.

Is this a direct-connected meter or a CT-input meter?

The current-input arrangement must be selected from the single-line diagram. CT ratio, wiring, required accuracy class and panel cut-out are confirmed for the quoted configuration.

Will it work with my existing system?

Use the listed inputs, power and protocol to match the device to your controller. Send its model or an input photo with the equipment request.