Skip to content
SunGeneAgricultural IoT
← Agricultural equipment

Soil pH · Temperature compensation · Calibration records

Soil pH Sensor with RS485 and Wi-Fi Calibration

Plug-in soil pH measurement from 0 to 14 pH, with RS485 Modbus RTU, a Wi-Fi web interface and three-point calibration. 9–36 VDC supply and IP68 housing.

Soil ph calibration probe: Soil / crop point → Sensor output → Local collection → Customer records.
Soil ph calibration probe — connection diagram.

Read soil pH at the measuring point and keep calibration information with the sensor. The probe provides RS485 Modbus RTU readings to the monitoring controller. Its Wi-Fi web page gives a phone or computer access to measurement and calibration functions.

Agricultural uses and site planning

SG-SOIL-127: Soil Temperature, Moisture and Salinity Sensor
Pictured: SG-SOIL-127 — Soil Temperature, Moisture and Salinity Sensor.

Soil pH measuring points

Add pH readings to the soil positions used for crop or greenhouse monitoring.

SG-SOIL-106: Soil Multi-Parameter Sensor
Pictured: SG-SOIL-106 — Soil Multi-Parameter Sensor.

Calibration at the probe

Use the web-guided calibration function and a standard solution or sample with a known concentration.

SG-RTU-157: Industrial Telemetry Remote Terminal Unit
Pictured: SG-RTU-157 — Industrial Telemetry Remote Terminal Unit.

Controller and service access

Use RS485 for the monitoring connection and the sensor web page for measurement and calibration access.

Send the details for your equipment list

Include these details with your inquiry so the equipment and options match your site.

  • Soil application and point count
  • Measuring position and mounting arrangement
  • Cable length and connector
  • Controller interface, available DC supply and destination country

Choose the configuration

Cable and connector

3 m bare-wire cable or 3 m cable with a quick connector. The selected cable arrangement follows the measuring point.

Three-point calibration

Calibration uses standard solutions or known-concentration samples. The latest three calibration records are available through the web page and RS485.

Mounting connections

Upper connection: 3/4-inch NPT. Lower connection: M42.

Specifications

Soil pH Sensor with RS485 and Wi-Fi Calibration specifications
ItemSpecification
pH measurement0–14.00 pH; accuracy ±0.1 pH; resolution 0.01 pH
CommunicationRS485 Modbus RTU and Wi-Fi web interface
Power supply9–36 VDC; 0.8 W
CalibrationThree-point calibration; latest three calibration records
Temperature compensationNTC30K; -10 to 120 °C ATC; accuracy ±0.2 °C; resolution 0.1 °C
Operating temperature-5 to 110 °C
Response specificationT90: 1 second
Housing and electrodePolypropylene housing; glass electrode
Mounting connectionsUpper 3/4-inch NPT; lower M42
Dimensions and weightØ50 × 213.9 mm; ≤340 g
ProtectionIP68
Standard cable3 m; bare-wire or quick-connector end
  • The operating temperature is -5 to 110 °C. The temperature-compensation measurement range is listed separately.
  • The latest three calibration records include the date, slope and calibration points.

Questions about this equipment

Can the sensor be read without a separate display meter?

The sensor has a Wi-Fi web page for measurement and calibration access from a phone or computer. RS485 Modbus RTU supplies the monitoring-controller connection.

Which calibration information is retained?

The latest three calibration records include the date, slope and calibration points. They can be accessed through the web page and RS485.

What supply does it use?

The supply range is 9–36 VDC and the specified power consumption is 0.8 W.

Connections and related equipment

The equipment list brings together the sensing or control points, supply, wiring, data connection and installation work.