Temperature and humidity
Two measured variables through RS485 Modbus RTU.
← Agricultural equipment
Air temperature · Relative humidity · Illuminance option
Outdoor Temperature, Humidity & Illuminance Sensor
Read outdoor air conditions beside a greenhouse, crop area or microclimate station. The louvered shield reduces direct sunlight and ground-reflected heat on the sensing area. Choose temperature and humidity, or add illuminance in the same housing.
Choose the configuration
Temperature, humidity and illuminance
Adds a 0–200,000 lux light channel in the same housing.
Connection
Bare-wire or quick-connector cable end. Cable length: 10 m.
Specifications
| Item | Specification |
|---|---|
| Power supply | 9–30 VDC; 0.2 W |
| Communication | RS485 Modbus RTU |
| Temperature measurement | -40 to 100 °C; accuracy ±0.2 °C; resolution 0.1 °C |
| Humidity measurement | 0–100% RH; accuracy ±3% RH; resolution 0.1% RH |
| Illuminance option | 0–200,000 lux; accuracy ±3%; resolution 1 lux |
| Operating temperature | -40 to 75 °C |
| Housing | UV-resistant plastic; seven-layer radiation shield |
| Dimensions | Ø140 × 133 mm |
| Mounting | Bent mounting bracket |
| Cable | 10 m; bare-wire or quick-connector end |
- The operating environment is limited to -40 to 75 °C, even though the temperature measurement range extends to 100 °C.
- The light channel measures illuminance in lux. PAR measurements use a separate quantum sensor.
Where it fits
Greenhouse outdoor reference
Provide an outside temperature and humidity reference alongside the measurements inside the growing area.
Farm microclimate records
Connect the RS485 measurements to a logger or RTU for time-stamped local weather records.
Daylight monitoring
Select the illuminance version for a lux reading at the measurement point.
Send the details for your equipment list
Include these details with your inquiry so the equipment and options match your site.
- Temperature/RH or temperature/RH/illuminance
- Number of points and destination country
- Bare-wire or quick-connector end
- Logger or RTU interface and available DC supply
Questions about this equipment
Does every version include the light channel?
Choose the temperature/RH version or the temperature/RH/illuminance version. The light channel belongs to the three-variable configuration.
How does it connect to a monitoring system?
It provides RS485 Modbus RTU readings and uses a 9–30 VDC supply. The connecting logger, RTU or gateway reads the selected channels.
Is the light reading PAR?
The light reading is illuminance in lux. A PAR quantum sensor provides the separate measurement used for photosynthetic photon flux density.
Connections and related equipment
The equipment list brings together the sensing or control points, supply, wiring, data connection and installation work.