Illustration: outdoor monitoring station with weather sensor, solar supply, enclosure and field probe.
Record wet periods in the crop canopy
Follow leaf-surface wetness near representative plants. Use the record with local crop observations; it does not identify a disease or replace an agronomic assessment.
Check nursery and greenhouse conditions
Compare wet periods at different planting positions. Placement, shading and the reporting interval need to suit the crop and the receiving system.
Specifications & version options
Measurements
Leaf moisture and leaf temperature
Wireless variant
LoRaWAN, NB-IoT or LTE-M (select one)
Operating temperature
-40 to +85 °C
Configuration
Bluetooth 5.1 remote configuration and OTA update
GNSS
Available on selected cellular variants
Power configuration
Solar with Li-ion battery or built-in 8500 mAh Li-SOCl2 battery
Need to connect this equipment to an existing controller or platform?
Share your current model, a photo or the connection you need. We help assess interfaces, power and the required configuration.
Public documents describe this product family and selection options. Wiring, register maps and compliance documents must match the model and version selected for your order.
Define the crop, disease-risk or irrigation decision and the required leaf-moisture duration and leaf-temperature reporting interval.
Choose one LoRaWAN, NB-IoT or LTE-M version from the destination country, operator coverage or LoRaWAN regional plan.
Select the battery or solar configuration from the reporting interval, coverage, service access and required autonomy.
Choose the canopy position, sensor angle and number of representative locations before fixing the mounting hardware.
Show 2 more selection checks
Specify whether GNSS is required; it is available only on selected cellular variants.
Plan how the sensing paddle will be inspected and cleaned so residue does not distort the field reading.
Compatible with
LoRaWAN gateway and network server
NB-IoT or LTE-M cellular service
Customer agriculture platform or data endpoint
Solar charging hardware for the solar-powered configuration
Typical package
Outdoor wireless sensor node
Cable-connected leaf moisture and temperature probe
Selected LoRaWAN, NB-IoT or LTE-M configuration
Selected battery or solar-power configuration
Applications
Sensor set, mast, solar supply, enclosure and probe placement are selected for the crop and site.
Use the node to compare leaf-wetness duration and leaf temperature across representative crop positions. It sends readings through the selected wireless network to the customer’s monitoring platform.
The specified product family measures leaf moisture and leaf temperature. A calibrated percentage range and accuracy must be confirmed for the selected sensor.
Which wireless network does it use?
Choose one LoRaWAN, NB-IoT or LTE-M product variant. The destination country, operator or LoRaWAN regional plan is confirmed before quotation.
Is GNSS included in every version?
No. GNSS is documented only for selected cellular variants and must be specified with the final configuration.
Does this product family provide RS485 Modbus?
RS485 or Modbus support has not been confirmed for this wireless sensor. Use a separately selected wired leaf or environmental sensor when a local fieldbus output is required.
What should I provide when requesting a quote for the Wireless Leaf Moisture & Temperature Sensor?
Crop, disease-risk or irrigation decision; Destination country and LoRaWAN / NB-IoT / LTE-M preference; Reporting interval, coverage and autonomy target; Canopy position, angle and point count
Where can I compare available model options?
Open the Application selection guide linked on this page. Use it to compare equipment options before requesting a configuration.
Will it work with my existing system?
Check the field signal, supply, protocol and receiving platform against the selected model. The connection options listed on this page are a starting point; send your equipment model or interface document so we can check the combination before ordering.
Product-family reference. Final ordered model and specifications are confirmed in the written quotation.
