Use local weather to plan farm work
Use measurements from the farm rather than relying only on a distant weather station. Position the sensor for the parameter being measured and check when the latest reading was received.

Pictured: SG-THS-154 — Atmospheric Temperature, Humidity and Barometric Pressure Sensor.
Slim IP65 probe for air temperature, relative humidity and optional barometric pressure. Select one parameter package, output, supply and cable configuration for the receiving logger or RTU.
Related application hardware: Soil & weather monitoring

Use measurements from the farm rather than relying only on a distant weather station. Position the sensor for the parameter being measured and check when the latest reading was received.
Farm weather stations can use selected channels to follow conditions across planted areas. The required measurements, mounting, power and receiving system determine the configuration.
The quotation lists the selected equipment, accessories, price and delivery terms.
Purchasing and delivery details →Selection guidance and application documents. Wiring, register maps and certificates must match the chosen model and version.
English · Web page · printable
Online selection guide
Application selection guide
PDF · English
Tell us which wiring, protocol or calibration documents you need for the equipment.
Compare uses, interfaces and configuration options. These are selection references.
Define the required function, interfaces, power, mounting and accessories for the site.
Confirm the exact model, configuration, photograph, document revisions, accessories, price, delivery and warranty.
Tell us what you want to measure and where. Send a model number or site photo if you have one.
Example equipment arrangement. Check compatibility and agree who handles software, PLC/SCADA programming and site installation.
Data destination
Customer platform or an agreed third-party service

Product photograph
Pictured: SG-RTU-145 — Water Level Telemetry Terminal.
This sensor family is ordered as a defined configuration, not as one unit containing every listed parameter and interface.
Compare related equipment and connection options.

Product photograph. Pictured: SG-WND-103 — Cup Anemometer (Wind Speed Sensor).
Select the sensor set, mast, solar supply, enclosure and probe positions for the crop and site.
Use this slim IP65 probe when a project needs air temperature and relative humidity, with barometric pressure added only on the selected three-parameter configuration. The parameter package, output, supply and cable are ordered as a matched configuration. The probe does not include a radio or cloud connection; remote reporting requires a compatible logger, RTU or gateway.

Application illustration · Wind and air instruments with a separate rain-gauge point.
Read guide
Application illustration · Solar supply at an orchard weather-measurement point.
Read guide
The available configurations are temperature and humidity, temperature / humidity / barometric pressure, temperature only or humidity only. Illuminance and CO2 are not supported by this product range.
Select one output to match the controller or logger: 4-20 mA, 0-5 V, 0-10 V, RS485 Modbus RTU, SDI-12 or IIC. Share the receiving device, cable length and supply so the complete configuration can be checked before quotation.
Typical accuracy is ±0.5 °C, ±3% RH and ±1 hPa. A high-precision digital-output option is documented at ±0.2 °C, ±2% RH and ±1 hPa; availability and the selected digital interface are confirmed in the quotation.
No. The 11-plate radiation shield and fixing rail are optional. Mounting height, direct solar exposure, nearby heat sources, precipitation and airflow should be reviewed before deciding whether the shield is required.
Use the listed inputs, power and protocol to match the device to your controller. Send its model or an input photo with the equipment request.