pH probe
0.00–14.00 pH; ±0.02 pH accuracy; 0.01 pH resolution.
For acidity readings in water or nutrient tanks. Glass electrode; operating temperature 0–100°C.
Water quality · 48-second overview
Product overview with English on-screen explanations. No audio. Read the chapter summary below.
Start with the water and the reading you need. Irrigation water, a nutrient tank and a fish pond call for different measurements. This range uses separate probes for pH, conductivity and dissolved oxygen, with RS485 Modbus RTU for the receiving logger or controller.
0.00–14.00 pH; ±0.02 pH accuracy; 0.01 pH resolution.
For acidity readings in water or nutrient tanks. Glass electrode; operating temperature 0–100°C.
EC: 0–500.00 mS/cm. TDS: 0–320,000.0 mg/L. Accuracy: ±1% of reading.
For conductivity trends in irrigation or process water. Graphite electrode; operating temperature 0–50°C.
0–20 mg/L and 0–200%. Accuracy: ±0.2 mg/L at 0–8 mg/L; ±0.3 mg/L at 8–20 mg/L.
For ponds and tanks. Membrane electrode; operating temperature 0–40°C. Include membrane care and access in the installation plan.
RS485 Modbus RTU and a Wi-Fi browser interface. 9–36 VDC for the version without air-pump cleaning.
These Taiwan-made probes have an IP68 housing. The browser interface provides calibration access; the logger and network provide the site data connection.
24 VDC air pump and nozzle option; 6.8 W listed consumption with cleaning, compared with 0.8 W without it.
Specify cleaning, cable length, connector and mounting arrangement with the quotation. Cleaning does not replace calibration or electrode maintenance.
0:00
pH, conductivity and dissolved oxygen measure different water conditions. Choose separate probes for the readings you need.
0:08
Check the acidity of irrigation, nutrient or process water. RS485 Modbus RTU connects to a matching logger.
0:16
Use EC to follow changes in dissolved ions. Match the range and temperature to the water at the measurement point.
0:24
For ponds and water tanks, measure oxygen alongside the water temperature. Choose the probe type and maintenance plan together.
0:32
Browser calibration is available on the instruments in this range. Air-pump cleaning is a separate option.
0:40
Send the water type, measurement points, required readings and logger interface.
Include a drawing, equipment list or a brief description of the site. These details help us match the instruments and connections.