45 m/s wind version
0–45 m/s wind speed and 0–360° wind direction.
Use this configuration where the expected wind falls within its range and those are the only readings needed.
Wind measurement · 32-second overview
Product overview with English on-screen explanations. No audio. Read the chapter summary below.
Choose the wind range and the readings you want on the logger before you choose a sensor. The 45 and 70 m/s versions measure wind speed and direction. The 45 m/s weather version can also measure temperature, humidity, pressure and optical rainfall.
0–45 m/s wind speed and 0–360° wind direction.
Use this configuration where the expected wind falls within its range and those are the only readings needed.
Adds temperature, humidity, pressure and optical rainfall.
List the channels the logger must record. Use a separate gauge if your specification calls for tipping-bucket rainfall.
0–70 m/s wind speed and 0–360° wind direction.
Select this range for a wind-only point requiring readings above 45 m/s.
RS485 Modbus RTU, 9–30 V DC, IP65.
Specify the cable end and available mounting space. The equipment page lists housing sizes and power by version.
0:00
Choose 45 or 70 m/s for wind speed and direction. Both measure wind without moving cups or a vane.
0:08
Only the 45 m/s weather version adds temperature, humidity, pressure and optical rainfall.
0:16
Use RS485 Modbus RTU and a 9–30 V DC supply. Choose bare wires or a quick connector.
0:24
For a quote, send the range, weather channels, mast or bracket, available power and cable run.
Include a drawing, equipment list or a brief description of the site. These details help us match the instruments and connections.