Skip to content
SunGeneAgricultural IoT
← Equipment videos

Farm weather · 40-second overview

Outdoor Weather Sensors: Air Readings and Logger Connections

Product overview with English on-screen explanations. No audio. Read the chapter summary below.

An outside air reading helps you compare conditions inside a greenhouse with the weather beside it. This shielded sensor measures temperature and humidity, with illuminance as an additional configuration. Add wind and rainfall instruments when those readings are part of the site plan.

Compare the equipment and connections

Air sensor

Temperature and humidity; optional illuminance. Seven-layer radiation shield.

Use beside greenhouses, crop blocks or an outdoor reference point.

Power and logger

9–30 VDC; RS485 Modbus RTU; 10 m cable.

Match supply, register mapping and polling to the receiving logger.

Wind and rain

Separate wind and rainfall instruments connect through their matching interfaces.

Choose a wind range and rain measurement method for the site. Include their power and mounting requirements.

  • The sensor shown measures air conditions. It does not contain wind or rainfall measurement.
  • Mounting, cable protection and electrical installation form part of the local site work.

Video chapters

  1. 0:00

    Measure air conditions at the crops

    Outdoor temperature and humidity with a seven-layer radiation shield. Illuminance is an additional configuration.

  2. 0:08

    Connect the measurements

    RS485 Modbus RTU output and 9–30 VDC supply. Match the sensor to the logger and field power.

  3. 0:16

    Add the weather readings you need

    Wind and rainfall use separate instruments. Choose the measurements for the site before selecting a combined station.

  4. 0:24

    Plan mounting and cable routes

    Use an open, representative location. Keep the shield ventilated. Plan bracket position, cable length and access.

  5. 0:32

    Request a weather equipment list

    Send the site, readings, power source and connection to your monitoring system.

Specifications and application planning

Send the details for your equipment list

Include a drawing, equipment list or a brief description of the site. These details help us match the instruments and connections.

  • Site and required measurements
  • Available power or off-grid supply
  • Logger or receiving-system interface
  • Mounting location and cable route