Serial inputs
Check the required RS485 Modbus RTU ports, addresses, registers and scaling.
Group compatible devices on the same bus and check terminators and wiring against the device instructions.
Weather station data logger · 40-second overview
Product overview with English on-screen explanations. No audio. Read the chapter summary below.
A farm weather station may use separate air, wind and rainfall instruments. Before choosing a logger, list what each sensor measures, how it is powered and how the records will be used. Commission one sensor at a time so faults can be isolated quickly.
Check the required RS485 Modbus RTU ports, addresses, registers and scaling.
Group compatible devices on the same bus and check terminators and wiring against the device instructions.
The documented weather logger supports local display, USB download and CSV export.
Choose measurement units, names and recording intervals, then test a sample export during commissioning.
Sensor supply and network options depend on the selected station configuration.
Size power for the logger, instruments and modem, and confirm local storage behaviour if the link is interrupted.
0:00
List the measurements and units, the sensor outputs and the cable lengths. Separate serial sensors from instruments that use other inputs.
0:08
For each Modbus RTU sensor, confirm its address, baud rate and parity. Devices on the same bus need distinct addresses.
0:16
Use the matching register map and check the units and scaling. Connect the next device after the first reading is correct.
0:24
Check how often the logger records, what is stored locally and how records are exported. Test what happens when the upstream network goes down.
0:32
Include the number of sensors, existing register maps, available power and where the data should go.
Include a drawing, equipment list or a brief description of the site. These details help us match the instruments and connections.