Collector and resolution
200 mm nominal collector diameter; 0.5 mm increments.
Confirm the increment against the rainfall measurement required for your site.
Farm rainfall · 32-second overview
Product overview with English on-screen explanations. No audio. Read the chapter summary below.
A gauge at the farm records the rain that falls near your crops. The stainless-steel collector shown here measures in 0.5 mm increments. Connect it to an RS485 logger to keep rainfall alongside the farm’s other weather records.
200 mm nominal collector diameter; 0.5 mm increments.
Confirm the increment against the rainfall measurement required for your site.
10 minutes and 1, 3, 6, 12 and 24 hours.
Choose the totals you need in the station record. The accumulated readings update every 10 minutes.
RS485 Modbus RTU; 9–36 V DC; consumption ≤0.5 W.
Confirm the logger connection, cable end and available supply before ordering.
0:00
This stainless-steel tipping-bucket gauge records in 0.5 mm steps. The collector is nominally 200 mm wide.
0:08
Read 10-minute totals and totals from 1 to 24 hours over RS485 Modbus RTU.
0:16
Provide 9–36 V DC. Specify bare wires or a quick connector for the run to the logger.
0:24
The collector should be accessible for inspection and cleaning. Send a photo or drawing of the proposed mount.
Include a drawing, equipment list or a brief description of the site. These details help us match the instruments and connections.