Skip to content
SunGeneAgricultural IoT
← Back to product
SunGene
Agricultural IoT
Product Family Selection Sheet
SG-WQE-105: pH Electrode with Temperature Compensation

Industrial Water Quality pH Sensor

IP68 pH probe for continuous irrigation, aquaculture and farm-water monitoring, with pH 0–14 measurement and RS485 Modbus RTU or 4-20 mA output families.

Category: Water & Wastewater Instrumentation

Pictured: SG-WQE-105 — pH Electrode with Temperature Compensation.

Specifications & version options

Range / resolutionpH 0–14 / 0.01 pH
Listed accuracy / response0.01 pH / 8 or 10 s to 98% in flowing liquid, by configuration
OutputRS485 Modbus RTU or 4-20 mA by selected variant
Supply / consumption7–30 VDC / <0.15 W
ProtectionIP68 probe
Mechanical optionsDirect cable, PG13.5/M8, NPT3/4 direct cable or NPT3/4 with M16 connector, by variant
Temperature / pressure0–60, 0–80 or 0–100 °C and 0.6, 0.8 or 1 MPa, by variant
Body / cableØ12 × 170 mm or Ø31 × 180 mm body; 5 m, 10 m or project-specific cable

Choose the output and mechanical configuration together

The specifications cover several probe configurations. Select the range, connection, output and power together; available options vary by model.

  • The measurement range is pH 0–14 with 0.01 pH resolution and a datasheet-listed accuracy of 0.01 pH.
  • Response is listed as 8 or 10 seconds to 98% in flowing liquid, depending on the selected configuration.
  • Select RS485 Modbus RTU or 4-20 mA together with the compatible receiving input. The supply is 7–30 VDC with consumption below 0.15 W.
  • Direct-cable, PG13.5/M8 and NPT3/4 threaded bodies with direct cable or an M16 waterproof connector are configuration choices, not universal features.
  • Temperature limits of 0–60, 0–80 or 0–100 °C and pressure limits of 0.6, 0.8 or 1 MPa depend on the selected mechanical variant.
  • Install the electrode vertically or at an angle with the sensing end down, away from trapped air and sediment. Keep the glass electrode wet in storage solution and plan periodic cleaning and calibration.

Typical applications

  • Farm water-treatment and wastewater pH monitoring with planned calibration and cleaning access
  • Tank, basin and process-water immersion points where the electrode can remain wet
  • Threaded pipeline or flow-cell installations using a compatible pressure-rated variant
  • PLC, SCADA and remote-telemetry projects using RS485 Modbus RTU or 4-20 mA by configuration

Inquiries: contact@sungeneiot.com · sungeneiot.com

Select the required measurements and connection options from this sheet. Include the quantity, destination and accessories in your equipment request.