Skip to content
SunGeneAgricultural IoT
← Back to product
SunGene
Agricultural IoT
Product Family Selection Sheet
SG-WS-163: Ultrasonic Automatic Weather Station

Ultrasonic Weather Station

Configurable 5-, 6- or 9-channel weather instrument with mandatory ultrasonic wind measurement and a selected RS485 Modbus RTU, RS232 NMEA-0183 or SDI-12 interface.

Category: Environmental & Agriculture Sensors

Pictured: SG-WS-163 — Ultrasonic Automatic Weather Station.

Specifications & version options

Channel sets5, 6 or 9 channels; wind speed and direction are mandatory
Five-channel setWind speed, wind direction, air temperature, relative humidity and atmospheric pressure
Optional channelsPrecipitation; on the 9-channel set: solar radiation, illuminance and dust
Wind speed0–60 m/s; 0.01 m/s resolution; ±2% FS accuracy
Wind direction0–360°; 1° resolution; <3° accuracy
Air temperature-40 to +80 °C; ±0.5 °C accuracy
Humidity / pressure0–100% RH at ±3% RH; 300–1100 hPa at ±1 hPa
Output optionsOne selected interface: RS485, RS232 or SDI-12
Protocol optionsModbus RTU (default RS485 protocol), NMEA-0183 or SDI-12
Power supply12–24 VDC
Power budget<3 W base instrument; optional heater and added modules sized separately
Update cycle1 second default; other cycles by configuration
Protection / climateIP66; -40 to +80 °C operating range
ConstructionASA main body; optional aluminium-alloy base
Mobile-platform optionsGPS / BDS and electronic compass are optional

Select the channels and interface before treating this as one weather station

The instrument is configured with selected measurement channels. The quotation lists the installed modules.

  • Wind speed and wind direction are mandatory. The five-channel set adds air temperature, relative humidity and atmospheric pressure; the six-channel set adds precipitation; the nine-channel set adds precipitation, solar radiation, illuminance and dust.
  • RS485, RS232 and SDI-12 are alternatives, not simultaneous standard outputs. Modbus RTU is the default protocol for RS485; NMEA-0183 and SDI-12 require their matching ordered interface.
  • The base instrument is below 3 W in the product documentation. Optional ultrasonic-head heating and added sensor modules change the site power budget and must be sized separately.
  • IP66 protects the instrument enclosure, but it does not remove the need for correct siting, mast rigidity, grounding, lightning / surge protection, obstruction clearance and periodic inspection.
  • For regulatory-reference measurements, confirm that the selected instrument, calibration documents and test criteria meet the intended use. A monitoring configuration alone does not establish regulatory suitability.

Typical applications

  • Unattended agricultural, environmental and field-weather monitoring stations
  • Orchard and nursery operating-condition monitoring linked to a compatible customer logger, RTU or SCADA system
  • Field and orchard weather points after positioning, orientation and mounting are reviewed
  • Compact weather inputs for customer-owned data platforms where a selected serial protocol is already defined

Inquiries: contact@sungeneiot.com · sungeneiot.com

Select the required measurements and connection options from this sheet. Include the quantity, destination and accessories in your equipment request.