Skip to content
SunGeneAgricultural IoT
← All kits

Farm Water Monitoring Equipment: Tanks, Pumps & Flow

Choose level, irrigation pump, flow and pressure equipment for farm water points. Select individual instruments or plan the sensors, logger, power and data connection together.

Plan each water point from the measurement and available installation. A tank level sensor, a pump run contact and a flow meter provide separate readings; the receiving inputs and data connection must match each device.

Tell us about the site

Tell us the country, what you need to measure, and any existing equipment, power or network. Send the details you know. We check suitable equipment and ask for any information still needed to quote a sample or pilot.

Buying this equipment

Equipment and quantity
Choose individual devices or an equipment list for a farm project. Include the quantity and destination.
Written quotation
Review the selected equipment, accessories, price and delivery terms in the written quotation.
Technical documents
Include datasheet, wiring, register-map, installation-document or certification requirements with your inquiry.
Project work and support
Agree the data connection, local installation, acceptance checks and support for the project.
Review procurement and support details →
  1. 1. Purpose

    Build a farm water equipment list around the readings the team needs.

  2. 2. Suitable sites

    Irrigation storage tanks, wells, reservoirs, pump panels and delivery lines.

  3. 3. What to send

    Send the country, water-point count and required readings, with any existing sensor or controller details.

Build the equipment list around the water task

Choose level, delivery or water-quality measurements first. The logger, power and data connection then follow the selected inputs and farm locations.

Radar Water Level Sensor
Radar level-sensor family; mounting and range follow the tank.

Measure from above the water

Read an irrigation storage tank where the top offers suitable access.

Equipment to select

A radar or ultrasonic level sensor and a receiving input matched to its output.

Send the tank height, top opening and a photo of internal obstructions. Check the blind zone and condensation at the proposed position.

Electromagnetic Flow Meter
Electromagnetic flow-meter family; pipe, liquid and installation determine the configuration.

Measure water entering the line

Compare pump status with water delivery during an irrigation period.

Equipment to select

An electromagnetic flow meter selected for the conductive liquid, pipe and installation, with a compatible receiving input.

Pump current or a run contact does not measure flow. Send the pipe size and material, liquid, flow range and whether the meter location remains full.

Industrial Water Quality pH Sensor
Water pH-probe family; EC requires a separate selected probe.

Add the water-quality readings needed

Follow pH and EC at irrigation water or nutrient-solution points.

Equipment to select

Separate pH and water-EC probes with outputs, mounting and calibration access matched to the installation.

Water EC and soil EC are different measurements. The crop or process specialist sets operating limits, and probes need a cleaning and calibration plan.

Send one water point or the farm point list

  • Country, water source and number of tanks, pumps or irrigation lines
  • Required readings and any existing sensors or controller
  • Power, network, receiving system and local installation arrangement

SunGene prepares individual hardware or the agreed farm equipment list, data connection and integration. Local teams carry out pipework, electrical work and site installation.

Select water-quality and level measurements separately

Select the readings that support your daily work, then match the probes, mounting, controller inputs and maintenance access.

Water storage, mixing and process tanks

Choose the water-quality readings needed at the tank, then select a separate level sensor if you also need to know how much water remains.

Measurements: Selected pH, EC or turbidity measurements; tank level is a separate signal

Illustration of water storage tanks and a farm water supply
Water storage illustration. The tank layout and liquid determine the measurement and mounting options.

Product-family illustrations. The quotation confirms the selected devices and configuration.

  1. 1Water-quality probe and, where needed, a level sensor
  2. 2PLC or RTU inputs matched to each output
  3. 3Tank records and agreed high / low or quality alerts
Typical measurement path. Sensor outputs, receiving inputs, field power and the data destination are matched before quotation.
  • Provide the liquid, tank dimensions, temperature, pressure and normal versus upset conditions.
  • Confirm immersion, threaded or flow-cell mounting, wetted materials and access for removing the probe.
  • Specify any drinking-water or process requirements before equipment selection. A few online parameters alone do not establish water safety or compliance.

Which parameter answers your question?

pH

pH changes in the selected liquid.

Match the output, mechanical body, pressure and temperature; plan buffer calibration and wet electrode storage.

Electrical conductivity (EC)

Conductivity changes in irrigation, aquaculture or process water.

Choose the EC range and wetted material. Confirm temperature basis and any calculated TDS or salinity values separately.

Dissolved oxygen (DO)

Oxygen conditions in ponds, aquaculture tanks and compatible water processes.

Select the probe type and range; confirm water chemistry, compensation, maintenance and alarm ownership.

Turbidity

Changes in optical cloudiness in the water.

Choose the NTU range, installation and cleaning option; turbidity is not a direct count of organisms or a universal solids concentration.

Several parameters at one point

Multiple selected water-quality measurements through one submerged assembly.

List the required sensing modules and data fields. The ordered parameter set, mounting and cleaning plan define the configuration.

For a quotation, send the water source or process, required parameters and ranges, point count, mounting photos, power and existing controller or platform. A short site description is enough to start.

Hardware in this guide

Product-family illustrations. See each product page for specifications and options.

Kit components

  • Level, flow or pressure instruments selected for the farm water points
  • Documented pump contacts or controller readings connected to compatible I/O
  • Logger or RTU, with the selected wired, cellular or LoRaWAN connection
  • Site power, enclosure, cable and protection selected for the installation

Hardware scope

  • Water level and delivery measurements
  • Pump-status inputs
  • Compatible logger, RTU or gateway
  • Field power, enclosure and data mapping

Connectivity & protocols

  • RS485 / Modbus RTU
  • 4G LTE / LoRa / NB-IoT
  • MQTT / Modbus TCP to SCADA

Applications

  • Irrigation water storage
  • Well and farm pump monitoring
  • Irrigation pipe flow and pressure
  • Several farm water points connected to a receiving system

Typical kit example

  • Tank level sensor selected for the water and mounting
  • Available pump run or fault input
  • Separate flow or pressure instrument where needed
  • Compatible logger or RTU, supply and data connection

Typical customers

  • Farm teams and grower groups
  • Irrigation and pump equipment dealers
  • Local installers and agricultural system integrators

Equipment in the system

Example equipment arrangement. Check compatibility and agree who handles software, PLC/SCADA programming and site installation.

What SunGene prepares

  • Sensor and input equipment list
  • Logger, network and field-power arrangement
  • Point names, units and data-connection requirements
  • Agreed software integration and installation handoff

Information needed from customer

  • Country and water-point list
  • Required readings and known ranges
  • Existing sensors, pump controller or receiving platform
  • Power, network and mounting or pipe photos

Products in this kit

Partnership

Equipment supply and agreed integration for farm projects, irrigation dealers, pump installers and independent local professionals.

Commercial notes

  • Flow, pressure, level and pump run state are separate inputs.
  • Match every sensor output and supply to the receiving equipment.
  • Local pump control, electrical protection and pipework are defined with the installation team.
Discuss a pilot configuration

Related selection guides

FAQ

Can I buy one instrument instead of a complete kit?

Send the measurement, range, output, country and quantity. SunGene selects individual instruments or prepares the equipment list for several farm water points.

Does pump current show how much water is delivered?

Current can indicate load or run state. A separate flow meter measures water flow, and a separate pressure sensor measures pressure. Select the measurements for the irrigation task.

Can the equipment connect to the existing farm controller?

Send the controller model, available contacts, input specifications or register documents. Match interfaces, supply, units and the data destination before selecting the logger or RTU.

Who handles installation and pump protection?

Local teams carry out mounting, pipework and electrical installation, including pump control, interlocks and dry-run protection. SunGene supplies the equipment and agreed data or software integration.