Keep remote measurement points supplied
Size field power around the final equipment load, seasonal sunlight and visit interval.
Explore this requirement← All industries
Find matching hardware →
Energy & Solar
Generation, metering and yield monitoring for solar sites and energy assets.
Hardware families for this requirement
The exact model, interfaces and enclosure are confirmed in the written quotation.
Equipment selection, or help with the whole farm?
Start with a country and a short description. We can help select one device, configure a kit, or plan the farm equipment list and agreed integration. Technical details can follow.
Compare ways to work with SunGene →Start from the site condition
Models and quotation stay on sungeneiot.com. Use the matching field condition first.
agri.sungeneindustrial.com
Agricultural irrigation and farm pumps
Review water delivery, pump state and greenhouse signals from existing farm facilities.
agri.sungenegroup.com
Farm water, soil and weather monitoring
Plan field and orchard measurements around available power, coverage and maintenance visits.
Challenges
- Distributed sites underperform silently
- No remote view of inverters or meters
- Downtime discovered weeks later
Typical hardware
- Solar site monitoring
- Remote meter reading
- Energy data collection
Is this the right page?
Use this page for distributed solar, facility metering or remote energy assets where the buying task is to collect trusted meter, inverter and weather data without replacing working field equipment.
Facility metering context
Sensors, interfaces, enclosure, power and mounting are confirmed against the actual project before quotation.
See where the system fits
Make each connection understandable
Check power, terminals, interfaces and data interpretation when readings are missing.
Explore this requirementWhat buyers usually need to monitor
Generation and consumption
Import, export, active energy, power and phase data from meters or supported inverter registers.
Solar context
Irradiance, module or ambient temperature and selected weather variables used to interpret generation trends.
Equipment status
Inverter faults, breaker or contact states, gateway heartbeat and site power alarms.
Data quality
Timestamp, polling interval, missing-device alarms and register scaling for repeatable reporting.
Equipment in the system
System design, software integration, PLC/SCADA programming and site installation responsibilities are agreed in the written project scope.
Data destination
Customer platform or an agreed third-party service
Typical hardware paths
Path 1
Existing inverter data
Best for: Sites with documented Modbus registers and a stable local network.
- 1Inverter register map
- 2RS485 or Ethernet gateway
- 3Data normalization
- 4Customer platform
Path 2
Independent revenue or sub-metering
Best for: Projects that require a separate measurement point.
- 1Selected meter and CTs
- 2Panel communication
- 3Data gateway
- 4Energy reporting system
Show the remaining deployment path
Related hardware
Hardware families for this requirement
The exact model, interface, enclosure and certificates are confirmed against the project before quotation.
Three-Phase Direct-Connected Smart Energy Meter
Direct-connected three-phase four-wire energy meter for circuits up to 100 A, with an RS485 hardware option for verified remote-reading integrations.
DIN-Rail Three-Phase Energy Meter
Four-module three-phase DIN-rail meter family for panel energy monitoring, with direct-connected 80 A or 100 A configurations and RS485 Modbus on selected variants.
Class C Pyranometer for Solar Radiation Monitoring
ISO 9060:2018 Class C thermopile pyranometer for 0–2000 W/m² global solar irradiance, with the output configuration selected for the site logger or RTU.
Solar-Powered Automatic Weather Station Kit
Off-grid automatic weather station kit with six-parameter sensing, RS485 Modbus, site-sized solar power and a project-selected LoRaWAN or 4G backhaul.
RS485 to Ethernet Gateway / Serial Server
Connect RS485, RS232 or RS422 field devices to Ethernet with 1-, 2- or 8-port serial-server options for Modbus bridging and direct IP communication.
4G/LTE Industrial RTU Gateway
Cellular RTU gateway for pump stations, water telemetry and remote industrial monitoring — collects RS485, analog and digital signals and uploads data over 4G LTE.
Confirm before selection
- Confirm single- or three-phase topology and current range.
- Provide inverter and meter register maps.
- Define whether readings support operations, allocation or regulated billing.
- Confirm CT type, panel space and installation responsibility.
- Define weather parameters, mounting and cleaning access.
- Specify the customer endpoint and acceptable data interval.
Send this for a useful quote
- Site count and one-line diagram
- Meter or inverter makes and register maps
- Voltage, phase and current range
- Required weather inputs
- Network and cabinet power
- Target country and quantity
Scope boundaries
- Metering suitability depends on the selected model, CT arrangement and local rules; no billing-grade claim is made without matching evidence.
- SunGene supplies monitoring hardware and data handoff, not grid protection, inverter control or guaranteed energy yield.
Hardware reference for the final selection
Exact model, interfaces and enclosure are confirmed in the written quote.
Official references
Buyer questions
Can you read an existing inverter or meter?
Yes when the device exposes a documented interface and register map. Share the exact protocol documents before gateway selection.
Is a weather station always required?
No. It is useful when irradiance and environmental context are needed to explain performance, but the required variables should follow the project objective.
Can data go to our energy platform?
Yes when you provide the protocol, endpoint, authentication method and payload requirements for review.