Machine Run / Current I/O Kit
KIT 1Base hardware
- • Remote I/O, RTU or gateway
- • Current or run-status sensing
- • Fault-contact and optional temperature input
- • Ethernet, cellular or RS485 data path
Application 04
Available after application reviewMachine Runtime & Condition Data Hardware
Start with run status, current, fault contacts and run-hour data. Vibration and temperature are considered only after the measurement method, installation and data path pass technical review.
Hardware families for this application
Representative image
Wireless Split-Core CT Current Sensor Family
Representative image
Distributed Remote I/O System
Representative image
RS485 to Ethernet Gateway / Serial Server
Representative image
LoRaWAN Vibration Monitoring Node
Representative product-family images. The exact model, interfaces and enclosure are confirmed in the written quotation.
Start from the site condition
Models and quotation stay on sungeneiot.com. Use the matching field condition first.
Problems this hardware addresses
- Collect motor current, run-hour and fault-contact status
- Add after-market monitoring inputs to machines
- Provide documented data to an existing maintenance system
- Capture vibration and temperature only after the technical method is defined
- Support repeatable machine-service hardware packages
Who buys
- Machine manufacturer service teams
- Predictive-maintenance and vibration-analysis providers
- Industrial maintenance contractors
- Pump, motor and compressor service companies
- Industrial data-acquisition integrators
Machine monitoring context
Representative site context. Sensors, interfaces, enclosure, power and mounting are confirmed against the actual project before quotation.
Typical Hardware Architecture
Final system design, software integration, PLC/SCADA programming and site installation are handled by the customer or their system integrator.
Customer system
Customer's SCADA / Cloud / PLC System
Two RFQ-ready definitions
Choose a starting hardware configuration
These are configuration starting points, not fixed stock bundles. Exact hardware, documentation and availability are confirmed in the written quotation.
Request this configuration
Vibration & Temperature Node Kit
KIT 2Base hardware
- • Vibration and temperature sensing node
- • Wired or wireless data path where required
- • Mounting accessories
- • Applicable data-format and interface documentation
Show project options and quote checks
Relevant hardware families
Images show representative product-family hardware. The selected enclosure, connectors and exact specifications are confirmed before quotation.
Interfaces and data handoff
- Run monitoring may use current, DI, temperature, RS485 or remote I/O inputs
- Vibration model evidence must confirm axes, bandwidth, sampling, outputs and calibration status
- Data delivery is reviewed against the customer PdM, CMMS, SCADA or API requirement
- Machine safety and shutdown control remain with the machine builder, control-system designer or responsible local integrator
Project responsibilities confirmed separately
- AI predictive diagnosis
- Failure-prediction guarantee
- Maintenance decision or root-cause conclusion
- Calibration claim without evidence
- Compatibility with every machine, PLC or VFD
- Machinery safety control or shutdown responsibility
Hardware to confirm against the site brief
Representative product-family images. Exact model, interfaces and enclosure are confirmed in the written quote.
What to send for a useful quote
- 1.Machine manufacturer/model and quantity
- 2.Measurement points and shaft speed
- 3.Available run/current/fault signals
- 4.Required vibration outputs, bandwidth, sampling and axes
- 5.Temperature and current requirements
- 6.Existing PLC/VFD and interfaces
- 7.Data destination and protocol
- 8.Power, network and environment
- 9.Calibration requirement
- 10.Sample/pilot/production timeline
- 11.Machine manual or point list
Primary selection guide
Condition Monitoring Hardware Selection Guide
Separate basic run and current monitoring from technically gated vibration work before selecting hardware.
Technical selection guides
Use these guides to confirm field signals, communications and installation constraints before choosing a hardware family.
Frequently asked questions
Who interprets machine-condition data?
SunGene supplies monitoring hardware and documented data access. A qualified analysis provider or machine-service team interprets the signals and makes maintenance decisions.
Is every vibration sensor calibrated?
Calibration status is disclosed per exact model. No calibration claim is made without supporting evidence.
Can raw vibration waveform be exported?
This depends on the selected hardware, sampling architecture and interface and must be confirmed before quotation.
Can the hardware connect to our PdM platform?
Compatibility is reviewed against the required protocol, payload, API and data fields.