Energy Data Acquisition Kit
KIT 1Base hardware
- • Energy meter and split-core CT selected for the circuit
- • RS485/Modbus data collection
- • Protocol or cellular gateway where required
- • Applicable wiring and register map
Application 03
Configuration confirmed before quotationBuilding & Facility Retrofit Monitoring Hardware
Metering, leak, pump-room and gateway hardware for ESCOs, MEP contractors, panel builders and BMS integrators.
Hardware families for this application
Representative image
DIN-Rail Three-Phase Energy Meter
Representative image
Wireless Split-Core CT Current Sensor Family
Representative image
LoRaWAN Water Leak Sensor
Representative image
RS485 to Ethernet Gateway / Serial Server
Representative product-family images. The exact model, interfaces and enclosure are confirmed in the written quotation.
Problems this hardware addresses
- Add sub-metering to existing panels
- Collect pump-room, water-tank and sump signals
- Add leak and high-level alarm inputs
- Bridge Modbus RTU devices to Ethernet, BACnet or cellular paths
- Deliver field data to an existing BMS, SCADA or customer cloud
Who buys
- ESCOs and energy-service contractors
- MEP contractors and panel builders
- BMS and building-automation integrators
- HVAC and facility-equipment suppliers
- Factory utility and facility-system integrators
Facility metering context
Representative site context. Sensors, interfaces, enclosure, power and mounting are confirmed against the actual project before quotation.
Typical Hardware Architecture
Final system design, software integration, PLC/SCADA programming and site installation are handled by the customer or their system integrator.
RTU / Data Logger
RS485 to Ethernet Gateway / Serial Server
Representative image
Review hardware family Customer system
Customer's SCADA / Cloud / PLC System
Two RFQ-ready definitions
Choose a starting hardware configuration
These are configuration starting points, not fixed stock bundles. Exact hardware, documentation and availability are confirmed in the written quotation.
Request this configuration
Pump Room & Leak Kit
KIT 2Base hardware
- • RTU, remote I/O or gateway
- • Leak, high-level or non-contact level sensor
- • Pump run/current/fault inputs
- • RS485, analog or digital signal collection
Show project options and quote checks
Relevant hardware families
Images show representative product-family hardware. The selected enclosure, connectors and exact specifications are confirmed before quotation.
DIN-Rail Three-Phase Energy MeterRepresentative family information
Wireless Split-Core CT Current Sensor FamilyRepresentative family information
LoRaWAN Water Leak SensorRepresentative family information
RS485 to Ethernet Gateway / Serial ServerRepresentative family information
Distributed Remote I/O SystemRepresentative family information
Interfaces and data handoff
- Modbus RTU/TCP, BACnet, digital input and 4-20 mA may be supported depending on exact hardware
- Existing BMS/SCADA point list and polling method must be reviewed
- Protocol/version claims are confirmed only after supplier evidence review
- Existing supported meters can remain in place after their interfaces, register maps and polling method are reviewed
Project responsibilities confirmed separately
- Complete BMS design or overseas installation
- Guaranteed energy saving or compliance outcome
- Blanket claim that a meter is legally required
- Universal integration with every BMS/SCADA
- Electrical panel certification or live-work responsibility
- Billing or revenue metering without exact approval
Hardware to confirm against the site brief
Representative product-family images. Exact model, interfaces and enclosure are confirmed in the written quote.
What to send for a useful quote
- 1.Facility type and country
- 2.Monitoring objective
- 3.Meter count, circuits, phase, voltage and current
- 4.CT and panel constraints
- 5.Existing meter/sensor register maps
- 6.BMS/SCADA/cloud and required protocol
- 7.Available network and panel power
- 8.Leak/level/pump signal list
- 9.Certificates and local constraints
- 10.Quantity and schedule
- 11.Single-line diagram, panel photo or point list
Primary selection guide
Data Acquisition Gateway Selection Guide
Review field interfaces, Modbus behavior, upstream protocols and failure handling before selecting retrofit gateway hardware.
Technical selection guides
Use these guides to confirm field signals, communications and installation constraints before choosing a hardware family.
Frequently asked questions
What does SunGene supply for an existing BMS?
SunGene supplies the selected meters, sensors, gateways and applicable integration documentation for delivery into the named BMS, SCADA or customer platform.
How should energy-saving outcomes be evaluated?
The hardware supplies measurement data. Savings are evaluated by the customer or its energy-service partner from the engineering changes, operating practices and verified baseline.
Will the gateway work with any BMS?
Compatibility is checked against exact protocols, versions, point lists and selected hardware.
Can these meters be used for billing?
Only when the exact model and applicable local metrology approvals have been verified for that use.