Skip to content
SunGene Industrial IoT HardwareSunGeneIndustrial IoT hardware

SunGene Industrial IoT

Waste Bin Fill-Level Monitoring

The reviewed device is a battery-powered LoRaWAN Class A ultrasonic sensor for fill level, full, empty and tilt status. Before a pilot, confirm the regional radio plan, 4 m range, 15 cm blind area, reporting interval and payload decoder.

LoRaWANUltrasonicOptional GPS / BeiDouRS485 / Modbus RTUNB-IoT / 4G alternative device path
Request a smart waste package

Typical use cases

  • Municipal waste-bin pilots
  • Campus collection points
  • Container location and movement monitoring
  • Protected transfer or composting areas needing NH3 or odour trends

Recommended hardware

  • IP68 LoRaWAN Class A ultrasonic fill-level and status sensor
  • Outdoor LoRaWAN gateway and customer network-server path
  • Optional GPS / BeiDou module or separate long-standby 4G tracker for moving assets
  • Optional wired configurable NH3 / odour sensor with protected mounting
Representative waste-bin installation with a protected fill-level sensor under the lid and a site gateway

Container fill-level context

Representative site context. Sensors, interfaces, enclosure, power and mounting are confirmed against the actual project before quotation.

Interface documentation

  • Regional LoRaWAN plan, OTAA onboarding and payload decoder
  • Documented full, empty, tilt, location and alarm payload fields
  • Use a different unit or gateway path when NB-IoT or 4G fill-level telemetry is required
  • Keep NH3 or odour sensing on a separate 12-24 VDC RS485 Modbus RTU instrument and state the battery-service assumptions

Quote inputs

  • Bin type, mounting point, empty / full distance and 15 cm blind-area clearance
  • Destination country, LoRaWAN regional plan, gateway and network server
  • Detection / upload interval, quantity, pilot scope and route fields
  • For gas sensing: selected channels, 12-24 VDC, airflow, enclosure and alarm purpose

Typical Hardware Architecture

Final system design, software integration, PLC/SCADA programming and site installation are handled by the customer or their system integrator.

Related SunGene pages

FAQ

What does SunGene need before quoting?

Please share the target country, application, sensor list, protocol, power source, quantity and timeline so the hardware package can be narrowed safely.

Is this a SaaS platform?

SunGene supplies monitoring hardware and documented data-handoff interfaces. Dashboard, cloud or HES operation remains with the customer or its named platform provider.