Illustration: long-standby GPS asset tracker mounted directly to an outdoor generator enclosure. Mounting, reporting interval, regional cellular profile, battery-life assumptions and documented customer-server handoff are confirmed before quotation.
Check the location of mobile farm equipment
Receive location reports from the selected tracking device. Network coverage, mounting, power and the reporting schedule determine when a new position reaches the platform.
Track equipment moving between sites
Construction and logistics teams can use a compatible cellular configuration. Confirm countries, operator coverage and server integration before choosing a device.
Specifications & version options
Cellular options
Regional LTE Cat.1 or LTE Cat.M configuration; destination and operator confirmed before quotation
Public documents describe this product family and selection options. Wiring, register maps and compliance documents must match the model and version selected for your order.
The standard configuration uses one long-standby cellular tracker. A fixed gateway is considered only for a separately defined BLE aggregation or closed-site collection project.
Customer-owned tracking server or third-party asset-management platform
How the model is selected
Check the installation, electrical interfaces and documents before choosing the model.
Site requirement
Asset type, movement profile, mounting and environment
Hardware configuration
Regional cellular profile, SIM, protocol and server handoff
Your quotation
Quantity, destination, reporting interval and runtime target
Treat battery life and location accuracy as project estimates
Battery life, coverage and position quality depend on the selected radio and reporting interval.
The source estimates up to eight years only at one report per day. Temperature, cellular registration, GNSS acquisition, alarms, retries and signal conditions can shorten runtime.
LTE Cat.1 and LTE Cat.M are separate regional configurations. Select the destination country, operator, SIM format and radio variant before quotation; this is not an NB-IoT device.
The listed 2.5 m CEP 50% figure is a receiver specification, not a guaranteed site-level result. Buildings, containers, sky view and antenna orientation affect location quality.
Show 3 more selection notes
Wi-Fi scanning can assist an indoor-location workflow only when the customer platform has suitable access-point location data. It is not a standalone indoor-position guarantee.
MQTT, TCP and UDP support still requires agreement on the server endpoint, payload, security, APN, acknowledgement and store-and-forward behaviour.
IP67 / IP69K does not by itself approve submerged use, chemical exposure or every mounting method. The enclosure, fixings, optional sensors and certificates are confirmed for the ordered configuration.
Tracking reusable containers
Illustration: warehouse tracking installation with a rugged tracker on a reusable logistics container. Tracker, mounting, reporting interval, regional cellular profile, optional sensors and documented server handoff are confirmed before quotation.
How to choose
Use this battery tracker for unpowered assets and intermittent reporting. For powered vehicles or near-real-time navigation, review a wired fleet tracker instead.
Select LTE Cat.1 or LTE Cat.M from the destination country, operator, SIM / eSIM plan and approved regional configuration; NB-IoT is not supported by this device.
Estimate runtime from the actual reporting interval, GNSS and Wi-Fi scans, movement / door / tamper events, retry policy, temperature and coverage rather than using the maximum source estimate.
Confirm screw, bolt or optional magnetic mounting, sky view, indoor positioning expectations and whether optional door, tamper or BLE accessories are required.
Show 1 more selection check
Define the customer-server endpoint, MQTT / TCP / UDP profile, APN, payload, acknowledgement, store-and-forward and alarm ownership before the pilot.
Compatible with
Customer tracking servers accepting the selected MQTT, TCP or UDP device profile
Nano-SIM or eSIM service on the destination-specific LTE Cat.1 or LTE Cat.M configuration
Containers, trailers, generators and construction equipment with screw, bolt or optional magnetic mounting
Optional tamper, door or BLE accessory workflows after the exact configuration is reviewed
Typical package
IP67 / IP69K long-standby tracker with the destination-specific cellular configuration
Three Li-FeS2 AA primary cells, with transport and replacement method confirmed before shipment
Screw / bolt hardware or an optional magnet mount
Selected nano-SIM or eSIM profile, APN and customer-server endpoint
Reporting, movement, door / tamper and store-and-forward settings documented for acceptance
Applications
Tracker mounting, reporting interval, regional cellular profile, battery-life assumptions and customer-server handoff are confirmed before quotation.
Use this long-standby tracker for unpowered assets that need scheduled location reports, movement events and optional door or tamper status. It is designed for low-duty-cycle telemetry rather than second-by-second fleet navigation. Select the regional cellular variant, reporting profile, mounting and optional sensors together, then validate network coverage and customer-server integration in a pilot.
Scheduled location and movement reporting for containers, trailers and portable equipment
Long-standby monitoring of generators and construction assets without a permanent power feed
Outdoor asset status using GPS / GLONASS, with Wi-Fi scan data available to assist indoor location workflows
Optional door, tamper and BLE accessory events integrated into a customer-owned tracking platform
Which cellular networks does this GPS asset tracker use?
The available configurations use LTE Cat.1 for selected EMEA / APAC deployments or LTE Cat.M for selected global / North American deployments. This is not an NB-IoT device. Share the destination country, operator and SIM preference so the exact regional configuration can be checked.
How long will the tracker operate on its batteries?
The source estimates up to eight years only at one report per day. Actual runtime depends on temperature, signal quality, GNSS acquisition time, reporting interval, alarms, retries and optional sensors. The quotation records the agreed duty cycle rather than guaranteeing a universal battery life.
Can Wi-Fi scanning provide indoor location?
The tracker can collect Wi-Fi scan data to assist an indoor-location workflow. The result depends on the customer platform and its access-point location data, so indoor accuracy is validated in the intended building instead of being promised from the device specification alone.
Can the tracker report door opening or tamper events?
Optional door and tamper sensors are available on selected configurations. Their connector, mounting, event logic and payload fields must be included in the quotation and pilot acceptance plan.
What should I provide when requesting a quote for the Long-Standby 4G GPS Asset Tracker?
Asset type, movement pattern and powered / unpowered status; Destination country, operator, SIM or eSIM preference; Reporting interval, GNSS / Wi-Fi scan frequency and event rules; Mounting surface, sky view, temperature and enclosure exposure
Where can I compare available model options?
Open the Asset tracking product family linked on this page. Use it to compare equipment options before requesting a configuration.
Will it work with my existing system?
Check the regional radio, operator, SIM, server endpoint, payload, authentication and acknowledgement requirements before ordering.
Product-family reference. Final ordered model and specifications are confirmed in the written quotation.
